RSTChris

New Member
As title, I want to lift my 90 up around 2inches or maybe alittle more?

What sort of kits out there are any good?

Seen some on ebay at £240, are they any good?

I dont wanna go professional so dont wanna be spending sh1t loads

Thanks in advance
 
Im gonna go for the ProComp kit from Paddock when i can afford, ive heard good things about them. Dont forget extended brake hoses and dislocation cones...
 
dont bother with dislo cones unless your going to be going mad. extended hoses may not be ness. i managed to lift my 1984 90 without them. fit the lift kit and then jack your landy up until wheels are off the floor. keep checking the hoses to see how tight they are as you go... you will soon see if you need extended ones or not.

if you are going mad, yor more likely to need dislo-cones on the rear. buy these 1st.

G
 
Check out MM4X4........(Martin Motors in Worcestershire)
Doing Britpart yellow +2" springs and Gaz shocks for £153.18 plus vat.

A bargain.....!!

You dont need to extend the hoses for a 2" lift.
 
Just had a look and their dislocation cones are only £25.53...if you feel you need them.
 
Thanks alot :)

Just out of interest, what are dislocation cones? something to stop the spring "popping" out i presume??

Also on standard suspension on full twist theres still loads left in the flexis, even on full lock.
 
Its when you 'bounce' you way up things when the springs pop out. Thats how it happens to me anyway.
 
I get ya.

Well ive just ordered a 2inch lift kit, dislocation cones, two new turret rings and 2 new diff gaurds.

All for £255.69 posted to my door. RESULT :D
 
WTF! I ordered this stuff yesterday around 15:00, it never said whilst ordering how long delivery would actually, woke up this morning at the bits have come!

Thats what i call good service! Will defo use them again
 
I went for the britgas kit from MM4*4.

Fitted it today and it wasnt that hard, took just over 3 hours with no air guns etc.

Im off out in a sec to see how it performs, il upload pics later
 

Similar threads