auf_wiedersehen_pet

Well-Known Member
Here's a list of a few bits that I'm after - Updated 26th June 2015.

  • Coin tray.
  • Scorpion Racing Safari snorkel grille in stainless.
  • OME +5" Dampers.

Fingers crossed. :D:D:D:D
 
Last edited:
I have some gutter trim that I took off my 3 dr 200 tdi. I know I split a bit of it but I think most of it is ok. I will go look for it tomorrow evening..
 
I have some gutter trim that I took off my 3 dr 200 tdi. I know I split a bit of it but I think most of it is ok. I will go look for it tomorrow evening..

Cheers mate.

If you could let me know how much is left between the splits - then I'll work out what it can be sawn down to. I'd need the overlapping connector clip things too.

Speak soon.

:D:D:D:D
 
Cheers mate.

If you could let me know how much is left between the splits - then I'll work out what it can be sawn down to. I'd need the overlapping connector clip things too.

Speak soon.

:D:D:D:D

I will get a pic of what I got, you are welcome to it. I decided not to put it back on.
Pm me if I forget n miss this fred. I got a memory like a sieve.
 
I will get a pic of what I got, you are welcome to it. I decided not to put it back on.
Pm me if I forget n miss this fred. I got a memory like a sieve.

Untitled-2_zps4e2f18d0.jpg


To do it in three sections, A pillar to B, clip, B to C, clip, C to D, clip measures up like this.

AB 570 mm
BC 700 mm
CD 820 mm

Unsuprisingly, the old trim was so brittle, the best I could manage was two good pieces AB & CD. Therefore, I need 1x 570mm, 2x 700mm and 1x 820mm.

JonnyP - PM coming your way. :D
 
Untitled-2_zps4e2f18d0.jpg


To do it in three sections, A pillar to B, clip, B to C, clip, C to D, clip measures up like this.

AB 570 mm
BC 700 mm
CD 820 mm

Unsuprisingly, the old trim was so brittle, the best I could manage was two good pieces AB & CD. Therefore, I need 1x 570mm, 2x 700mm and 1x 820mm.

JonnyP - PM coming your way. :D

Sorry chap, will def look tomorrow..
 
I may have a few pairs of Sumo bars knocking around in the shed, is the front one to suit a drop arm with a ball joint or the later type that uses 2 x trackrod ends and a drop arm with a hole in it?
 
I may have a few pairs of Sumo bars knocking around in the shed, is the front one to suit a drop arm with a ball joint or the later type that uses 2 x trackrod ends and a drop arm with a hole in it?

I have the later type with 2 trackrods and need a disco droparm with the hole in it if you have one in ya shed??? :D
 
This was all I could find.. The strip is just under 1 meter long and in pretty good nick. I got the front n back bits and 6 joiners.
I thought I had more strips so will have another look, but I might of chucked them..?
The other curved bit I seem to remember was a joiner on the back, but its a bit broken. One other bit had a split, but I think the rest is ok..
 
This was all I could find.. The strip is just under 1 meter long and in pretty good nick. I got the front n back bits and 6 joiners.
I thought I had more strips so will have another look, but I might of chucked them..?
The other curved bit I seem to remember was a joiner on the back, but its a bit broken. One other bit had a split, but I think the rest is ok..

Cheers mate. I'm happy to take that off your hands. Let me know how much you want and how much for postage. I'm off on holiday on Monday - just in case it goes quiet at this end.

:beer2::beer2::beer2::beer2::beer2:
:5bparty::5bparty:
 
Cheers mate. I'm happy to take that off your hands. Let me know how much you want and how much for postage. I'm off on holiday on Monday - just in case it goes quiet at this end.

:beer2::beer2::beer2::beer2::beer2:
:5bparty::5bparty:

I don't want anything for it chap.. Just pm me your address and I will get it off to you next week somewhen :0)
 
I'm pretty sure I've got all the grommets on the V8 I'm breaking, along with the heated screen connector.

Will have a looksie
 
Well

A mate has 4x azimuths on his hilux, and he is about to get a disco 5.

He is currently waiting for it from LR but it is anytime now kinda thing.

I don't know if he is transferring his lighting onto the disco or starting again with new stuff.

The gear will defo come off the hilux.

So, that's just a mention before you buy new ones because I'm damn sure you won't find a set just kicking about anywhere else!! :D
 
Hi bud I have a few solenoids knocking about from doors, mine ate from a lhd though, drivers door so still nearside to you fellas, if you want em you can have em, but to avoid stupid post costs I'm in the UK in about 7 weeks, do you want em, free like. Pick up in Manchester or posted from Manchester at your cost :)
 

Similar threads