• Coin tray.
• Scorpion Racing Safari snorkel grille in stainless.
• OME +5" Dampers.

JonnyP said:

I have some gutter trim that I took off my 3 dr 200 tdi. I know I split a bit of it but I think most of it is ok. I will go look for it tomorrow evening..

Click to expand...

auf_wiedersehen_pet said:

Cheers mate.

If you could let me know how much is left between the splits - then I'll work out what it can be sawn down to. I'd need the overlapping connector clip things too.

Speak soon.

Click to expand...

JonnyP said:

I will get a pic of what I got, you are welcome to it. I decided not to put it back on.
Pm me if I forget n miss this fred. I got a memory like a sieve.

Click to expand...

auf_wiedersehen_pet said:

To do it in three sections, A pillar to B, clip, B to C, clip, C to D, clip measures up like this.

AB 570 mm
BC 700 mm
CD 820 mm

Unsuprisingly, the old trim was so brittle, the best I could manage was two good pieces AB & CD. Therefore, I need 1x 570mm, 2x 700mm and 1x 820mm.

JonnyP - PM coming your way.

Click to expand...

Boris113 said:

I may have a few pairs of Sumo bars knocking around in the shed, is the front one to suit a drop arm with a ball joint or the later type that uses 2 x trackrod ends and a drop arm with a hole in it?

Click to expand...

redhand said:

I have the later type with 2 trackrods and need a disco droparm with the hole in it if you have one in ya shed???

Click to expand...

JonnyP said:

This was all I could find.. The strip is just under 1 meter long and in pretty good nick. I got the front n back bits and 6 joiners.
I thought I had more strips so will have another look, but I might of chucked them..?
The other curved bit I seem to remember was a joiner on the back, but its a bit broken. One other bit had a split, but I think the rest is ok..

Click to expand...

auf_wiedersehen_pet said:

Cheers mate. I'm happy to take that off your hands. Let me know how much you want and how much for postage. I'm off on holiday on Monday - just in case it goes quiet at this end.

:beer2::beer2::beer2::beer2::beer2:
:5bparty::5bparty:

Click to expand...

Aydena said:

I'm pretty sure I've got all the grommets on the V8 I'm breaking, along with the heated screen connector.

Will have a looksie

Click to expand...

Mr Noisy said:

So, that's just a mention before you buy new ones because I'm damn sure you won't find a set just kicking about anywhere else!!

Click to expand...

DiscoPol said:

Pick up in Manchester or posted from Manchester at your cost

Click to expand...

auf_wiedersehen_pet said:

............


That's a great offer - thanks. Cheap postage from Manchester sounds good. Let me know how much it is and I'll sort you out.

Click to expand...