The aerocatches did you remove the landrover bonnet catches or do you still have both catches in place?.
 
roger352 said:
The aerocatches did you remove the landrover bonnet catches or do you still have both catches in place?.
Click to expand...

I binned the original catches and cable ages ago. My bonnet fluttered like mad before I did the Aerocatches and I could never get my hand in to pull the original cable!!
 
auf_wiedersehen_pet said:
Little mock up with some scrap bits.

IMG_6340_zps70fc702d.jpg
Click to expand...

I kept mine a little narrower to stiffen it a bit:

imagejpg1_zps2882ddd6.jpg


imagejpg2_zpsf7681c2d.jpg


imagejpg3_zps7f70c5b3.jpg
 
auf_wiedersehen_pet said:
Oh, Matron!

Where did you get the top clip from?
Click to expand...

I got them locally in France, so not much good to you :rolleyes: but these latches are pretty common. I started out with those over centre hasps but they were too flimsy and hard to mount on chequer plate and the robust ones are just too big so I went back to basics.
 
One did have an idea along the lines of getting two rear door chequerplates and having the whole thing hinge down :)
 
Never really got far when I posted this as a different thread........

Tried to source a front OS knock and found a loud metallic clack/knock coming from the transfer box - both front wheels in the air and moving one wheel back and front. Aaaaaargh!!



Ignore the video (just listen to the sound) as I was holding the phone with one had whilst rocking the OSF wheel with my NS leg.
 
Well it's not easy to tell from a video of a noise...

Has it ended up in diff lock by accident?

Does the diff lock still work, ie you can lock and unlock it?

Does the centre diff operate smoothly?
 
Mr Noisy said:
Well it's not easy to tell from a video of a noise...

Has it ended up in diff lock by accident?

Does the diff lock still work, ie you can lock and unlock it?

Does the centre diff operate smoothly?
Click to expand...

Nope - no lights or wheel scrubbing.

It did last time but I'll check again.

As above.

:confused:
 
auf_wiedersehen_pet said:
:mad::mad::mad:

Are Polybush still in business? Can't get any answer to email queries to them.
Click to expand...

Seems that asking the same question publicly on their Facebook page has provoked a response!

Only took seven days and four attempts to get a reply! It's a bloody good job their bushes are the best otherwise my money would be going elsewhere.
 
auf_wiedersehen_pet said:
Never really got far when I posted this as a different thread........

Tried to source a front OS knock and found a loud metallic clack/knock coming from the transfer box - both front wheels in the air and moving one wheel back and front. Aaaaaargh!!



Ignore the video (just listen to the sound) as I was holding the phone with one had whilst rocking the OSF wheel with my NS leg.
Click to expand...

Have a close look at your front prop uj's they make that kinda noise when there fooked
 
Swapped one of my thermometers for a green LED version. It also does battery voltage and clock. I'm happy with it so I've ordered another to replace the interior thermometer too.

IMG_6364_zps94801263.jpg
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Unknown coolant leak at the front onto the oil filter and diff
Replies
0
Views
150
MAF Diver
MAF Diver
S
S2a rocker/arm hangup?
2 3
Replies
55
Views
2K
Tall Ratbag
T
I
Beeper refuses to shut up
Replies
5
Views
602
ironhorse
I
F
Disco 2 No power to air compressor.
Replies
0
Views
524
fortsmith
F
L
Restricted performance and EGR block
Replies
7
Views
417
Anaconda
A