auf_wiedersehen_pet said:
Fixed the window ECU - been without rear windows for far too long. The recent hot weather meant that my daughter was getting too hot when sitting in the back.

It was a text book cracked joint. Removed, cleaned soldered and refitted. One hour door to door. The worst bit was the amount of extra wiring I'd put in front of the ECU.

IMG_4658_zps19df5299.jpg


Hidden away.

IMG_4660_zps122e93d1.jpg


IMG_4661_zpsd052c1da.jpg


It's under there somewhere.

IMG_4662_zps7b456a38.jpg
Click to expand...

I did mine a while back. Those little clips in the ecu are a fookin #### to pull out I found!
 
Enjoyed this thread, a lot of great work and ideas.

Was wondering if when it came to paint you considered using a Plasti-Dip coating?

I have read up on them recently and they give a great looking finish and looks easy enough may be on the £££ side though. Seems like a win win as you could just peel it off when you've had enough of that colour and change it! looks to be very popular in America but not so much over here yet.

Had a quick search on the site to see if anyone had done it as im not quite brave enough to be the first! haha
 
Disco_Chris said:
Enjoyed this thread, a lot of great work and ideas.

Was wondering if when it came to paint you considered using a Plasti-Dip coating?

I have read up on them recently and they give a great looking finish and looks easy enough may be on the £££ side though. Seems like a win win as you could just peel it off when you've had enough of that colour and change it! looks to be very popular in America but not so much over here yet.

Had a quick search on the site to see if anyone had done it as im not quite brave enough to be the first! haha
Click to expand...

Just read on another thread someone did there defender vents with plasticote
 
Brilliant thread - took ages to read through all of it.

Bet you're counting down the days until the summer holidays!
 
i did my last landy in matt paint, worked a treat, try different rollers first i found some disolved more with the paints i were using due to the solvents in them...the solvent resistant ones were worse then the non solvent resistant lol
 
Dear auf_wiedersehen_pet,

sorry but the photo I took from the internet. There was no security or prohibition so you do not have to be angry

kitestetico-uk

Reply in your email program or through My Messages
--------------------------------------------------------------------------
From: auf_wiedersehen_pet
To: kitestetico-uk
Subject: Other: auf_wiedersehen_pet sent a message about LAND ROVER DISCOVERY 2 WIDE ARCHES #190865254253
Sent Date: 21-Jul-13 20:43:33 BST

Dear kitestetico-uk,

Hi,

I was just wondering why you are using a photograph of my car, on my drive taken by me. The photograph is my intellectual property. Please remove the photo immediately otherwise I will report you to ebay and my solicitor.

Regards

Rob

auf_wiedersehen_pet

LAND ROVER DISCOVERY 2 WIDE ARCHES

Item Id:

190865254253

End time:

02-Aug-13 14:59:05 BST
Click to expand...

Tosser. :p:p:p:p:p

In his other items, there are loads of photos of lots of cars in random locations - do you think he stole those too? :rolleyes::rolleyes::rolleyes:
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Unknown coolant leak at the front onto the oil filter and diff
Replies
0
Views
150
MAF Diver
MAF Diver
S
S2a rocker/arm hangup?
2 3
Replies
55
Views
2K
Tall Ratbag
T
I
Beeper refuses to shut up
Replies
5
Views
602
ironhorse
I
F
Disco 2 No power to air compressor.
Replies
0
Views
524
fortsmith
F
L
Restricted performance and EGR block
Replies
7
Views
417
Anaconda
A