Right well firstly I didn't use a timer relay, purely because I didn't think I needed one.

The timer relay is fitted for numptys who can't remember to turn their screen off.

I trust you will not be one of those people if you can fit your own bloody screen in the first place!! :D

The screen needs to be fused at 30 amps per side and thus wired accordingly.

I use two 40 amp relays fused at 30 amps, switched by a single switch and supplied with power and earth from the bulkhead fitting (200 thing, 300 needs to pull from fusebox as suggested)

I honestly wouldn't bother with timer relay because you will never have it on that long anyway, the work very quickly!

If you do wish to use it, look on Vehicle Wiring Products Ltd. Suppliers of auto electrical parts. as they have the pinouta for different types I relay iirc and that may help.

Failing that, the relay pinouts are likely to be identical to a normal relay, just this one switches off after some time. Is it 4 pin or 5 pin?

Is that of any assistance so far?

I like this. I have a spare starter switch (momentary contact) which would sit well in the cigarette lighter hole. Just need the relays which I possibly have in the garage.

Thanks.
 
I need the heated front screen connectors from the wiring loom with a decent length of wire. I've just had a new screen fitted (with a lifetime warranty) and I don't want to chop the connectors off to wire it up my Disco which isn't fitted with a heated screen as standard.

Anybody?
 
If you only have a momentary switch then you will need patching relays.

Ideally you want a latching switch with indicator lamp.

I got a spare rear screen switch from another disco and fitted that into my dash binnacle next to the original rear screen switch.

Very OEM :)
 
A Bowler Nemesis i would if i could:D. but a villa in Lanzarotei going a bit high for me sorry:(. £15 fine send me your address:)
 
If you only have a momentary switch then you will need patching relays.

Ideally you want a latching switch with indicator lamp.

I got a spare rear screen switch from another disco and fitted that into my dash binnacle next to the original rear screen switch.

Very OEM :)

I was thinking if it was a momentary switch then there is no way to leave it switched on.
 
IMG_4552_zps196b1b18.jpg


IMG_4553_zpsf558181d.jpg


IMG_4556_zpsd71b1ed2.jpg


IMG_4557_zps2a004dfc.jpg


IMG_4558_zpse63653ff.jpg


IMG_4561_zpsd49f3024.jpg


IMG_4562_zps7a136dcd.jpg


IMG_4563_zps97391d6c.jpg


IMG_4564_zps3efcd249.jpg


Fingers crossed for the 2nd coat of green tomorrow!
 

Similar threads