timtheenchanteruk said:
Id put them on leaning backwards, I seem to remember from my boyracer days that grooves facing forwards give slightly better cooling, but can cause faster pad wear.

I might also be talking ****e, but its one of those things I'm sure I read in Max power or similar, and its stuck.
Click to expand...

There not for aiding cooling there for letting the gasses and dust out when the brakes get realy hot as in motorsport applications, why any one would feel the need to fit grooved dics on a landy is beyond me, unles you intend doing track days init :eek:.
 
Right, I've just come across this photo of the same discs as mine, it's a photo of the rear disc but is it the near side or offside? And are the discs the correct way around?

019A8BF4-4998-4DB7-BF2D-1E8DF3B26751-483-0000003B44BEE3DA_zpsfb6ee346.jpg
 
I think thats the off side (Drivers), so the vehicle would be heading off to the right of the photo if it drove off. If thats correct, then I would say the disc is on the wrong way round, because the groves are leaning forward, not back, so sh1te will be directed toward the hub centre, bot away.
 
Different companies make them different ways, all the ones I've dealt with are marked up on the box they came in.
 
oldskool said:
There not for aiding cooling there for letting the gasses and dust out when the brakes get realy hot as in motorsport applications
Click to expand...

so what replaces the hot gasses that are let out then ? would it be cooler air than is let out thus cooling the brakes, or have I got it wrong and nothing replaces it and it creates a vacuum ?
 
Optimus Prime said:
so what replaces the hot gasses that are let out then ? would it be cooler air than is let out thus cooling the brakes, or have I got it wrong and nothing replaces it and it creates a vacuum ?
Click to expand...
cooler air, keep pads clean etc ,slotted are better for heavy vehicles as well as fast vehicles ,whilst maybe not vital performance parts to aid braking
 
Optimus Prime said:
so what replaces the hot gasses that are let out then ? would it be cooler air than is let out thus cooling the brakes, or have I got it wrong and nothing replaces it and it creates a vacuum ?
Click to expand...
No its replaced with mud which sets solid thereby giving you solid discs like the cheaper ones:)
 
Right, looking at the location of the calliper in this photo, it must be the rear offside disc, which would turn clockwise. So I would have thought that the slots should be pointing the other way. In which case that particular disc should be on the near side. Anyone agree/disagree?

019A8BF4-4998-4DB7-BF2D-1E8DF3B26751-483-0000003B44BEE3DA_zpsfb6ee346.jpg
 
LeadFarmer said:
Right, looking at the location of the calliper in this photo, it must be the rear offside disc, which would turn clockwise. So I would have thought that the slots should be pointing the other way. In which case that particular disc should be on the near side. Anyone agree/disagree?

019A8BF4-4998-4DB7-BF2D-1E8DF3B26751-483-0000003B44BEE3DA_zpsfb6ee346.jpg
Click to expand...

correct,disc is on the wrong side.
 
Optimus Prime said:
so what replaces the hot gasses that are let out then ? would it be cooler air than is let out thus cooling the brakes, or have I got it wrong and nothing replaces it and it creates a vacuum ?
Click to expand...
Nothing replaces it, when pads get realy hot they produce gas/dust this can stop the pad making contact with the disc the cross drilling and slots allows the gas to escape.

Cross drilling obviously works a lot better on vented discs as the gasses and dust can escape through the disc, infact they tend to block up on solid discs.

The slots also scrape the pads keeping them clean.

Slotted discs can be quite noisey as well but probably not an issue on a landy :D

Sorry for delay getting back to you Mr Prime i don't get on here as often as i would like cos im normally to busy fixing peeps cars.
 
You must log in or register to reply here.

Similar threads

BigRedMachine
Lost my bearings - stuck race!
Replies
11
Views
927
dag019
dag019
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
534
miktdish
miktdish
S
Disco4 rough idle after injector issues
Replies
8
Views
436
Stevie135
S
A
Side Finisher Spring Clips
Replies
2
Views
480
Badger688
Badger688
MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
1K
miktdish
miktdish