N

n10beg

Member
Hi, i finally got round to taking off the covers on the inside of my a and b pillar on the inside of my p38. ( there originally coated with a cream 'rock's but mine has gone fatty and i want to redo it) I've cleaned off the old flock to get it back to smooth plastic and have found a DIY kit on ebay for about £30, but i don't know much about it so was wondering if anyone had advice or knew someone who could do it? Thanks :D
 
! have a high voltage electrostatic flocker you could borrow, better finish than the puffer bottles, only prob is getting it to you, could post if time is not important.
 
Tin of beans size, 9V battery one end, tazer voltage the other end, makes those little things shoot into the glue and stand upright like a yasmine vega fan:)
piece of **** to use but not suitable if you have a pacemaker :)
 
Thanks guys, I've asked for a price from the flock shop, once i have a reply i shall let you know what im going to do. But thanks again for the help!
 
A pal of mine had his whole dash center console and all the interior plastics, just shy of 230 iirc, quality work and a damn good price
 
You must log in or register to reply here.

Similar threads

O
wheel bearing questions
Replies
4
Views
374
Ollie_Mif
O
Naf623
Disco 2 What fixings to use for the wheel arch liners?
Replies
2
Views
435
jamesDiscoTD5
jamesDiscoTD5
J
Disco 2 TD5 Facelift headlights, anyone put LEDs in there, and what kit works?
Replies
10
Views
1K
tom1979
tom1979
DanClarke
P38A How Much? !!!
2
Replies
28
Views
2K
RangeRoller dt
RangeRoller dt
landowner
110 roof ribs
Replies
11
Views
957
landowner
landowner