T

tonymccandless

New Member
I have a set of alloys (16") with good tyres on them. Given existing ones need replaced I was thinking of swapping these on.

Issue is that alloys only have a LR part number of ANR4663 on them. Local dealer can't seem to find them on his system.

I suspect they are Disco 2's. Any advice on whether they are a straight fit or do I need spacers etc ?
 
I imagine pictures of the wheels and details of what car/model you want to fit them too would be helpful...!
 
packard said:
So is the ANR4663 wheel the standard one for the p38 ?
Click to expand...

Could also have be an option on versions of the P38 that were not fitted with them, up to VIN WA376580. they were called Meteor, according to my sales catalogue, as I nearly bought a P38 once, so glad I didn't :D
 
Last edited:
discool said:
Could also have be an option on versions of the P38 that were not fitted with them, up to VIN WA376580. they were called Meteor, according to my sales catalogue, as I nearly bought a P38 once, so clad I didn't :D
Click to expand...
Why are you "clad" you didn't? Much better car than the Disco IMHO.;):)
 
Typo there should have said Glad..
Yes it was year on year but the RR did cost a bit more, but the issues they have now, that's not for me.

Other than a few service items the only replacement part my disco has had is a water pump when the bearing failed, not bad and what Id expect. but then I only bought the disco for weekend use and then only some times.
 
discool said:
Typo there should have said Glad..
Yes it was year on year but the RR did cost a bit more, but the issues they have now, that's not for me.

Other than a few service items the only replacement part my disco has had is a water pump when the bearing failed, not bad and what Id expect. but then I only bought the disco for weekend use and then only some times.
Click to expand...

Have had a couple of Discos both were ok motors apart from their preoccupation with trying to rust out from under you. A good Disco is an ok motor but a good, specially the far more reliable diesel P38, is in a totally different class.
 
wammers said:
Have had a couple of Discos both were ok motors apart from their preoccupation with trying to rust out from under you. A good Disco is an ok motor but a good, specially the far more reliable diesel P38, is in a totally different class.
Click to expand...
+1,I rest my case.;)
 
You must log in or register to reply here.

Similar threads

GSF 109
For Sale Discovery 1 original alloys
Replies
0
Views
588
GSF 109
GSF 109
Brenda__the__Defender
Advice on Tyre choice please!
Replies
14
Views
626
Brenda__the__Defender
Brenda__the__Defender
C
Wheels and the mysteries of offset
Replies
6
Views
681
Croyland999
C
K
Honda alloys on FL1
Replies
1
Views
607
Nodge68
Nodge68
L
another wheel et thread
Replies
0
Views
137
lockitup
L