Mick Guilbert

Mick Guilbert

Well-Known Member
RRS 2007 TDV6 sorry to ask but I have an air suspension warning come up on the dash, I have changed the rear off side sensor but fault is still coming up on dash after about a minute, code reader shows no codes stored. Should i get the suspension calibrated or has anyone any other ideas.
Many thanks
 
Last edited:
Car model and year may help. Someone else who has not read the first post in this section.
 
Newinnwoodman said:
Ok I guess it’s not a landrover specific test kit like all comms or lynx?
Click to expand...
No it’s just a generic tester, when looking at the screen shot of the suspension the right side does not sit at the same height as the left that is why I wondered if I needed a calibration
 
Well if you don’t want to rely on the garage all the time you’ll need to get your hands on one specifically for RR.

If you have a pal with a RR you can go halfers or buy one outright. If you don’t youll find yourself swapping parts based on guess work I’m afraid.
There’s lots of discussion on here about the best one to get. Once you have one it’s like a breath of fresh air . Pardon the pun!!!
 
You must log in or register to reply here.

Similar threads

O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
458
oldradiotech
O
M
Air suspension problems
2 3
Replies
59
Views
3K
Rubberknees
Rubberknees
M
Air suspension problems
Replies
1
Views
336
Datatek
Datatek
B
rangerover l322 2006 td6 air suspension
Replies
5
Views
792
backinblack
backinblack
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
749
kevleaper
K