Hello I have a issue with my alarm. The interior sensor does not pick me up if i am inside and ive armed it even after opening and closing a door. the LED seems to flash at the armed rate not faster for 10 seconds as rave suggests so its arming immediately suggesting sensor issue. fuse is ok and there is 12v and neg at the sensor. if i hold pin switch down and release after arming the alarm sounds ok.
when i first got the veichle the alarm was going off randomly but after fitting a new landrover battery it seemed to stop this but hence i find the sensor and led not as it should. what do you think?
when i bought the car the garage read codes and one was 149 low voltage at interior sensor!
new sensor? and does it need resetting in the bcu or does it need reading first?
when i first got the veichle the alarm was going off randomly but after fitting a new landrover battery it seemed to stop this but hence i find the sensor and led not as it should. what do you think?
when i bought the car the garage read codes and one was 149 low voltage at interior sensor!
new sensor? and does it need resetting in the bcu or does it need reading first?