tomcat59alan · Apr 16, 2014

wammers said:
Rear rises first at all times, someone has either got the pipe positions wrong or more likely replaced the solenoid coils in the wrong place, easy fix. If you will pardon the French the garage are ****ers.

That's a bit hard on ****er's Tony. Remember, there are two types of men, ****er's and liar's.

Does sound as if the garages didn't know what they were doing though.

wammers · Apr 16, 2014

tomcat59alan said:
That's a bit hard on ****er's Tony. Remember, there are two types of men, ****er's and liar's. Does sound as if the garages didn't know what they were doing though.

Maybe the garage were all lying self abusers. If the front rises first it tells an immediate story. It is not what the ECU expects so it throws a fault.

mutsnutz · Apr 16, 2014

where are you located ?

Derek Ward · Apr 16, 2014

Evolving said:
The front would rise as normal but the rear was lazy would take a few minutes for it to rise after being parked overnight. Then the EAS fault appeared on the dash and all 4 lights started flashing next to the air button at which point i took it to the garage, they diagnosed it as being the valve block. They changed it then had an issue with the key/immobilizer which took them weeks to sort out, anyway they sorted that and now the suspension wont rise at all its on the bump stops all round.

I've had a second opinion from another garage who are suggesting to swap it to coil springs which is why I'm here I need expert opinion not a main dealer one who will more than likely suggest i spend loads on a 4x4 which is worth a few hundred.

You need the diagnostics from Datatek before you can do anything. It looks like you have a 'hard' fault on the system which requires clearing before it will operate. Without these diagnostics, you won't get very far.

Evolving · Apr 16, 2014

Cheers fella's. How much is the Datatek Diagnostic kit? is it simple to set up and use?

Druim · Apr 16, 2014

Evolving said:
Cheers fella's. How much is the Datatek Diagnostic kit? is it simple to set up and use?

Software is free, just need cable and maybe 9 pin to usb plug, buying it from DataT (ArtoD2) you also get usefull stuff on disc

http://www.rswsolutions.com/index.php?option=com_content&view=article&id=53&Itemid=56 Download

Datatek · Apr 16, 2014

Evolving said:
Cheers fella's. How much is the Datatek Diagnostic kit? is it simple to set up and use?

Not a lot, I'll PM you with details

blackstrat · Apr 16, 2014

See how great this site is already fella? Now Datatek's on the case you'll soon be wafting along on the magic carpet again!

tomcat59alan

Well-Known Member

wammers

No longer with us, RIP

mutsnutz

Well-Known Member

Derek Ward

Active Member

Evolving

New Member

Druim

Well-Known Member

Datatek

Well-Known Member

blackstrat

Well-Known Member

Similar threads