Rosie 67

Member

• Oct 1, 2023

• #1

Hi all
My 2009 rr sport suspension won’t stay in access mode
Press the button and down it goes as soon as it is down it beeps and says lower suspension when clear of obstacle and goes in to extend mode
Had it plugged in said o/s/r height sensor fault and mechanism so fitted new sensor but still the same
Any ideas please
Cheers Rosie

 

Datatek

Well-Known Member

• Oct 1, 2023

• #2

Rosie 67 said:

Hi all
My 2009 rr sport suspension won’t stay in access mode
Press the button and down it goes as soon as it is down it beeps and says lower suspension when clear of obstacle and goes in to extend mode
Had it plugged in said o/s/r height sensor fault and mechanism so fitted new sensor but still the same
Any ideas please
Cheers Rosie

Click to expand...

Don't use access mode, it just wears out the pump etc, learn to climb in.
Was the suspension re calibrated after the new sensor was fitted?

 

Rosie 67

Member

• Oct 1, 2023

• #3

No was told didn’t need it

 

gstuart

D3 Grandad

Full Member

• Oct 1, 2023

• #4

Plus 1 as indeed the new height sensor will require calibrating

when a new one is fitted the ECU needs to be told what the suspension height is , will require a suitable code reader to do a full suspension height calibration where all 4 x corners are matched with one another

 

Rosie 67

Member

• Oct 1, 2023

• #5

Ok will look at getting some one to calibrate it and then hopefully it works
Cheers Ian