D

dirtyrov

New Member
Hi guys, I have just bought a p38 which was missing the EAS air block so i have got myself a good second hand one but when i have come to pipe it up my car is missing a pipe.

There is a 4mm air line from the air block and i don't know where it is ment to go. The air line seems to be missing on my P38. Can anyone tell me where it should connect to?
 
dirtyrov said:
Hi guys, I have just bought a p38 which was missing the EAS air block so i have got myself a good second hand one but when i have come to pipe it up my car is missing a pipe.

There is a 4mm air line from the air block and i don't know where it is ment to go. The air line seems to be missing on my P38. Can anyone tell me where it should connect to?
Click to expand...

Before we all chipping in bits of advice is it safe to assume that the P38 hasn't had a coil conversion?
 
No its still on bags, the pipe number is 11. All the other pipes are 6 or 8mm there is only one 4mm one. I will try and take a pic tomorrow if needs be. I have tried to find diagrams of the system but i can't find a detailed enough one which shows where the 4mm line goes.
 
I have posted many times the Valve block diagram with colour coded pipe positions. For some reason can't get it to load. Do a search.
 
I printed your diagram out Wammer when I went to see Dopey....

Just found the printed copy I made and the number 11 port isn't connected to anything....

If I find a way to scan it in I will post the picture...
 
Saint.V8 said:
I printed your diagram out Wammer when I went to see Dopey....

Just found the printed copy I made and the number 11 port isn't connected to anything....

If I find a way to scan it in I will post the picture...
Click to expand...


For some reason i can't get attachements to load onto thread. Just going to try it on Internet Explorer in case AOL is having a skits.
 
jpg.gif


It was AOL tossers. 11 is 4mm pipe for exhausting Diaphragm valve holding pressure.
 
Last edited:
Saves me trying to find it....

I gave up on AOL years past alsorts of issues with them....best stick with IE, Firefox, Chrome, Opera et al...
 
Saint.V8 said:
Saves me trying to find it....

I gave up on AOL years past alsorts of issues with them....best stick with IE, Firefox, Chrome, Opera et al...
Click to expand...


I have stuck it in 'How To' section. Should be there in a bit, can't see that it will take a lot of vetting. :D:D:D
 
Thanks for all the help guys, I just wish i could get my eas softwear to initialize with the dam thing now. keep getting 28 & 80 codes!
 
You must log in or register to reply here.

Similar threads

J
Rangerover l322 suspension fault
Replies
2
Views
679
RangeRoller dt
RangeRoller dt
ar1g3
P38A Which EAS repair kit to get?
Replies
18
Views
3K
Grrrrrr
Grrrrrr
S
Air to Springs
6 7 8
Replies
154
Views
11K
Mark Piercy
Mark Piercy
D
Eas system holds air then drops after driving and turn off
2 3
Replies
47
Views
4K
Datatek
Datatek
L
P38A Retrofit heated front screen
2
Replies
34
Views
3K
Rubberknees
Rubberknees