Well update....

Cleared fault codes and so far the FFRR drives like a dream, no codes showing up and regarding the FBH today I programmed the remote and that's also working.

Mileage, the dash details says 26.6MPG and that's around town plus it shifts as well.

The only niggle I have is the drivers heated seat seams to not work the lights light up but no heat but the passengers works ok, owe well cant have it all and also managed to get a set of wifi headphones (LR original with cases) and they work the rear a treat.

Regards
 
The heated and cooled seats work by blowing warm or cold air through the seat cushions. You should be able to hear the fan running when you rotate the heat/cool dial. If you can't hear the fan that could be your problem. If you can hear the fan it could be a problem with the air ducting.

My seats take a few minutes to heat or cool, can be 5 minutes before I feel and heat or cooling depending on the air temperature in the car
 
I don't think we have cool seats, don't see a pelter under the seat or how to change the seat to cool?
 
If you have solely heated seats, then AIUI, the seat heating switch is mounted in the A/C temperature selector with 2 LEDs and is a push switch to cycle through off/low/high

If you have climate seats, then there is a separate rotary knob for each seat that you turn clockwise for heat and anti-clockwise for cool. There are 2 oblong LEDs representing the seat cushion and seat back. Pushing the switch cycles the selection between full seat and cushion only
 
Checked again today and yes its heated and cool seats so I'll have another look at the drivers seat soon.
 

Similar threads