tulipandthistle
Active Member
"If this fault code was shown by nanocom it might be wrong, double check with hawkeye or other to make sure... or unplug the pressure transducer and read codes againSierra. My warning light comes on after 10 or so miles and goes out after I turn off ignition but, will come back on again as soon as I drive into first bend. I am getting the 04-02 Direction control valve current out of range on my Nanocom. Fault wont erase. Where do I go from here?....Thanks for any help and sorry for hijacking thread....
btw do you have the warning on? cos if not the code is hystorical and you can forget about it