chrisall69

chrisall69

New Member
Morning all,
What's the best way to get the abs sensor out, is it just loads of wd40 and pry bar and brute force, think it's about time I got the abs problem sorted.cheers guys
 
You need PLUSGAS NOT WD40. Use grips gently and try to twist them back and forth to loosen.
 
+1

WD40 is not a lubricant or a release agent, penetrating fluid - unless you are referring to the Specialist range that WD40 do....they have a dedicated Penetrating Fluid within that range....but the Blue Can WD40 is nothing more than a Water Dispersant!
 
Where would that come from iv got a motorists diy place in Rotherham they do all sorts like that, I will try there
 
I squirted plusgas every other day for 2 weeks on my front abs sensor's, and they came out easily when needed. Happy days !
 
I gave it a good coating earlier tried to release it but it's not going anywhere so will give it another coating every day then try again in a couple of days
 
Datatek said:
WD40 is useless as a penatrating agent whatever the publicity might say to the contrary.
Click to expand...
+1....

If it was as good as they say, why did they bring out the 'Specialist' Range which includes a Penetrating Fluid??
 
You must log in or register to reply here.

Similar threads

kricktd5
L332 abs/ HDC
Replies
1
Views
506
Datatek
Datatek
I
L322 ABS query
Replies
0
Views
609
isamyku
I
F
Disco 2 Weird rear abs sensors
Replies
11
Views
421
Freelander1banger
F
Rockingit
L322 ABS / Steering issue
Replies
11
Views
1K
Rockingit
Rockingit
deangermouse
HDC fault
Replies
3
Views
1K
deangermouse
deangermouse