aaronmorris said:

Made a start on the wings today. The headlight nose cone thing was more time consuming to replace than I thought as it is all spot welded together.
But it doesn't help I haven't done one before, second one came apart much quicker.

What I started with View attachment 119696

Unbolted and disassembled.

View attachment 119697

Nose cone disassembled, took a little longer than I thought as I said above, but it's nothing difficult, just spot welds and the odd rivets, second one came apart much quicker once I knew how.



0


View attachment 119698

All the individual parts where sanded whilst in pieces to make life easier, including the new bit and riveted back together.

View attachment 119699

Wing top rubbed down, I decided to try and remove as much of the vile red paint as I could, for a couple of reasons really, because I don't know what it is, finish is rough as hell, and I don't think the vehicles original paint was keyed prior to applying it and it hasn't adhered properly and kind of chips off, and under that is the original paint that is still shiny.
Not exactly flat either but not the worst I have seen, I may or may not do some repair work later on, but I think I will try the roller idea suggested the other week first.

View attachment 119700

Started re-assembly.
View attachment 119701

View attachment 119703

And done, still needs some more prep work, but it is back together and should only need minor bits.

View attachment 119704

View attachment 119705

I am reasonably pleased with how the panels have lined up, the wing skin is a little high on the front corner where the wing top and nose cone meet, but other than that all is good.
Got the other side stripped and started cleaning/prepping but didn't get time for re-assembly, so that's tomorrows job.

Click to expand...

Landyfox said:

Has anyone seen or heard from Aaron? It’s been a while and I miss his rebuilds!

Click to expand...

Al2O3 said:

I sent him a PM back in Sept 2017, but he didn't reply.
IIRC back at the time he was caught up in a house move that didn't happen, building his massive shed, he was working all hours and getting further drawn in to his job and, TBH, I think he had burnt himself out with several successive Landy builds. I must admit I miss him and his build threads. I hope he is doing ok.

Click to expand...

raywin said:

I actually met Aaron once he is a quiet person who just seemed to enjoy working on something useful, I felt that like many young people now he was disappointed that he was willing to work hard but finding it difficult to get a job where his effort would be appreciated.
Perhaps he has found that now, and his focus has shifted, if so I am happy for him, but I too miss his rebuilding, the green one looked so good, I wish I had bought it.

Click to expand...

TorsionBhudda said:

I'm friends with him on Facebook think he's given up on rebuilding Land Rovers. He has been posting pic recently of abandoned French Chateau's some the pics he has been posting are stunning and a lot of the places look like the owners just up and left leaving behind most of their belongings.

Click to expand...

Al2O3 said:

Is he living in France? Tell him we're asking after him!

Click to expand...

TorsionBhudda said:

Not sure if he's living in France or has just been travelling I will send him a link to this thread and maybe we can tempt him back he could tell us about his adventures and post the pics in AG

Click to expand...

TorsionBhudda said:

Not sure if he's living in France or has just been travelling I will send him a link to this thread and maybe we can tempt him back he could tell us about his adventures and post the pics in AG

Click to expand...

TorsionBhudda said:

I messaged him today and shared a link to show the revival of this thread. He's doing good and been very busy but says he will pop back and say hi once he has a chance. He was chuffed that everyone is still asking after him and a bit surprised.

Click to expand...