J

johnsgti

New Member

• Jun 28, 2012

• #1

Hi all,
I been seaching, but can not find my simptons. The problem is iv just changed the servo & master cylinder. When bleeding the front brakes, no fluid comes out of the top nipple, fluid comes out of the lower to nipples very slow. Im using a easy bleed & im doing the inner 2 first.
Desperate to get this sorted, using it for work tomorrow, don't fancy relying on the hand brake to stop me.

 

nathan5346

Well-Known Member

• Jun 28, 2012

• #2

Dont even think about the handbrake instead of brakes

 

J

johnsgti

New Member

• Jun 28, 2012

• #3

No, just trying to make a laugh about it, iv been on it since 6, and im starting to loose the will to live.

 

J

johnsgti

New Member

• Jun 29, 2012

• #4

Ok ,so used it for work, had to drive slow and keep me distance. Now, iv been outside for the last hour bleeding these brakes, loads of air in them. I started on the n/s r, then o/s/r, and then to the front, i started with the n/s lower 2 nipples, then the upper nipple, and like wise on the o/s/f, the problem is im getting no fluid at all out of the top nipple both sides. Any ideas guys.

 

W

whatty

New Member

• Jun 30, 2012

• #5

does it have abs fitted,or are the front brake lines connected directly to the front callipers

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Jun 30, 2012

• #6

I'd check back what you've done, it's possible (and I'm not taking the ****) that you've done something wrong or missed a step out in fitting either part or in the bleed sequence.

Last time I changed a master cylinder it just bled up as per the book.

Maybe the m&s you changed were faulty?

 

J

johnsgti

New Member

• Jun 30, 2012

• #7

Hi, thanks for replys, just thought id change the m/c as i new my one was good, and yes the brakes bleed straight up.. Never felt so good.. Lets see how long i can drive it before the next thing goes wrong.