CohPC · Nov 9, 2022

lynall said:
The thought has crossed my mind, but then it is only something else to rattle.

Line the screw holes up for the range change gaiter pita.
Rubiks cube the drivers side floor plate in and out, gets me every time.
Never enough odd shaped screwdrivers for all the weirdly placed screws.

Someone needs to design a gearbox tunnel that's split down the middle and hinged so you can unclipped it and open it up easily

Colthebrummie · Nov 9, 2022

lynall said:
The thought has crossed my mind, but then it is only something else to rattle.

Line the screw holes up for the range change gaiter pita.
Rubiks cube the drivers side floor plate in and out, gets me every time.
Never enough odd shaped screwdrivers for all the weirdly placed screws.

Heavy duty rubber floor mats stopped any rattles.

Col

NI_Landy · Nov 14, 2022

Colthebrummie said:
My speedo is surprisingly accurate. From 0 to about 45 it matches my gps really well and it over reads by about 5 mph at about 60ish

Col

I think my speedo is also accurate, assuming of course I am doing 0 to 100mph in less than 3 seconds??

nickjaxe · Nov 15, 2022

Has your gear stick any resistance going into reverse.....if not the spring stop as somebody else mentioned with be missing....make finding your gear hit and miss.

Odd your wiper move at diffent speeds....something must be slipping.

CohPC · Nov 15, 2022

nickjaxe said:
Has your gear stick any resistance going into reverse.....if not the spring stop as somebody else mentioned with be missing....make finding your gear hit and miss.

Odd your wiper move at diffent speeds....something must be slipping.

Your right it was, drove to north weald Sunday and the passenger side wiper decided that wiping the whole window was too much like hard work and gradually wiped less and less, nut just needed tightening, works properly now but is less amusing

CohPC

Well-Known Member

Colthebrummie

Well-Known Member

NI_Landy

Member

nickjaxe

Well-Known Member

CohPC

Well-Known Member

Similar threads