T

tomcat59alan

Well-Known Member
Afternoon I wonder if anyone can help.After my success curing the oil leak on my P38 My friend has asked me if I can sort out his leak on his XJR 4.2SC .it appears to be from where the oil filter housing bolts to the engine,it then runs down and runs around the pressed steel part of the sump.I can see a pipe joint on the housing which I assume is from the oil cooler and will be fitted with an O ring.I cannot get any information from the Jag forum unless it's for cleaning products and polishes:rolleyes: Hope someone can help , didn't @myfirstl322 have a Supercharged L322 once?:oops:;):D
 
All I can help with from the manual I have:)
Yep O ring.

J
 

Attachments

  • SC oil filter housing.pdf
    466.7 KB · Views: 296
tomcat59alan said:
Just to see if there's a gasket between the oilflter housing and the engine thanks.
Click to expand...
Screenshot_20220611-144247_Office.jpg
Screenshot_20220611-144258_Office.jpg
 
Screenshot_20220611-152157_Office.jpg
tomcat59alan said:
Thanks but that shows the oil cooler as part of the oil filter housing, from memory his housing is just a block held on by , probably eight 8mm headed bolts.guess I'll have to pull it apart and see,he's got other cars so he won't be stuck. I'll post the answer to the question when I get it Thanks again.
Click to expand...
View attachment 266965
 

Attachments

  • Screenshot_20220611-152212_Office.jpg
    Screenshot_20220611-152212_Office.jpg
    182 KB · Views: 114
  • Screenshot_20220611-152224_Office.jpg
    Screenshot_20220611-152224_Office.jpg
    143.6 KB · Views: 122
Last edited:
Remove the housing and inspect the gaskets and inner gasket supports. They go brittle and the plastic gives up. I've just done one on a vw 1.6tdi. A common fault and a new complete unit was fitted instead after someone else had smothered it in silicon (silicant)... :rolleyes:
 
Mark Piercy said:
Remove the housing and inspect the gaskets and inner gasket supports. They go brittle and the plastic gives up. I've just done one on a vw 1.6tdi. A common fault and a new complete unit was fitted instead after someone else had smothered it in silicon (silicant)... :rolleyes:
Click to expand...
I can't go round to my mates because he's tested positive.hope it doesn't need a new unit, they're over £300+ the dreaded.
 
You must log in or register to reply here.

Similar threads

Chris1993
Sport Range Rover oil leak
Replies
2
Views
858
Graculus
Graculus
Graculus
L405 Engine oil leak / fumes in cabin
Replies
10
Views
2K
marjon
marjon
M
L405 2018 oil cooler replace /leak cost
Replies
1
Views
1K
marjon
marjon
MrGorsky
P38A Front Crankshaft Oil Seal Speedi Sleeve
Replies
6
Views
746
Ratae
R
A
P38A Head Gasket Kit & ARP Bolts ?
2
Replies
23
Views
929
enjoi
enjoi