Approve or not??

  • It was Great

    Votes: 2 100.0%

  • Utter ****e

    Votes: 0 0.0%

  • I've had better

    Votes: 0 0.0%
  • Total voters
    2
  • Poll closed .
battenberg

battenberg

Well-Known Member
Squeeling belt??
The Penny Trick:
  1. remove belt
  2. back of the single stud holding in the tensioner
  3. put a penny in the 9 o'clock position
  4. tighten back up, put belt back on.
300tensioner.jpg
 
Hi all. 1994 M Reg. 300 TDi.
I changed my Timing Belt and Serpentine Belt yesterday. Squeeling started about 2 minutes into test drive. I will do the penny trick tonight when I get home 'cos I believe wot you say.
But can anyone explain exactly what is squeeling (its like a budgie wanting feeding!) and how the penny trick actually stops the squeeling? Is it 'cos the new belt is tighter than the old one? Does this indicate a problem with the tensioner or its design ? (Just curious).

Thanks Gals and Guys.
 
the tensioner roller is acutually 'out of true' the penny brings it back in line Its a manufacturing fault on these engines. Replace the bearing £5 off ebay. instructions are in this forum.
 
battenberg said:
the tensioner roller is acutually 'out of true' the penny brings it back in line Its a manufacturing fault on these engines. Replace the bearing £5 off ebay. instructions are in this forum.
Click to expand...

He would save no less than £4.99 doing it the way you said first.

CharlesY
 
Disco Moneypit said:
Is the bolt for the belt tensioner a left or right handed thread? Mines tight as ****.
Click to expand...

the stud bolt is a normal right hand thread, the bolt on the roller is left hand thread. crack the left hand thread while the tensioner is still on the engine when you come to change the bearing....
 
Damn! just came across this thread, and it worked a treat. many many thanks, that's resolved an annoying point I've have since buying the disco three months ago.
 
Just done the penny trick, That noise has been driving me mad for weeks. iIfitted a new belt and bearing, still it came back. Not anymore. Thanks.
 
joda said:
Just done the penny trick, That noise has been driving me mad for weeks. iIfitted a new belt and bearing, still it came back. Not anymore. Thanks.
Click to expand...

All you guys should be paying £1 each to Battenberg!
He'll be a rich man if all the 300tdi owners using this idea send him a pound!
I'm on 25% commission.
CharlesY
 
battenberg said:
Squeeling belt??

The Penny Trick:
  1. remove belt
  2. back of the single stud holding in the tensioner
  3. put a penny in the 9 o'clock position
  4. tighten back up, put belt back on.
Click to expand...
You're a legend!
I seriously couldn't work out what the noise was... I'll try it out tomorrow, because it's one bastard of a noise it makes.

Cheers
Todd
 
2mins read this 5 mins plus 1p fae the wife and magic, the help from you guys is excellent, budgie now r.i.p.
thanks chaps
 
You must log in or register to reply here.

Similar threads

Lex Myster
Freelander 2 TD4 Timing Belt
Replies
4
Views
436
Stanleysteamer
Stanleysteamer
F
Auxiliary belt
Replies
7
Views
817
freelandertd4bmw
F
landyfun
300tdi alternator blocked up
Replies
1
Views
976
v8250
v8250
terr
Td4 aux belt
Replies
5
Views
566
terr
terr
B
FL2 now a 'total loss'...what is the process for buying back?
2
Replies
23
Views
1K
Buel10
B