Garth of the west
New Member
Who said the Scots are tight? Surely not.......................
Trewey
Cockernee, Pasty munchin bastid.
This is a 200TDi Fender, but might give you some ideas.
http://www.landyzone.co.uk/lz/f7/treweys-home-made-snorkle-60174.html
http://www.landyzone.co.uk/lz/f7/treweys-home-made-snorkle-60174.html
gizgrey
New Member
Have a look here ... Snorkel ... OK. it's not a homemade, but it'll give you an idea of the hole and how to fix the snorkel tube to the A-post etc ..
I'll have a look tomorrow and se if I've still got the template, I can scan it and email it you if you like, might help a bit.
ye mate that would be a help..
Found it.
Be aware that the scan and your subsequent print-out might not be exact but it'll be close. Also be aware that this is for a Southdown snorkel, can't remember the diameter, so if you use a different tube size or different angle into the wing the the hole needs to be different. Has to be said, think I said it in my write-up, that this hole is a tad wide, but needs to be to allow a little movement when fitting ..
Have fun, post some pics when you're done ..
Be aware that the scan and your subsequent print-out might not be exact but it'll be close. Also be aware that this is for a Southdown snorkel, can't remember the diameter, so if you use a different tube size or different angle into the wing the the hole needs to be different. Has to be said, think I said it in my write-up, that this hole is a tad wide, but needs to be to allow a little movement when fitting ..
Have fun, post some pics when you're done ..
