Al2O3 said:
I've another technical question. :oops:
How do the gudgeon pins work on these pistons?
I can see on the picture on the Turners web site that there are circlips. Presumably to go in the sides of the piston. Are the gudgeon pins an interference fit on the con rods? ie, does one or the other need to be heated or cooled. :eek:
Click to expand...
Now that was a pointless question. It's just occurred to me that I'll find out when I take the old ones off! :oops::oops::oops:
 
Yep, greyhair, that's typical of me. Over thinking things and worrying about what might go wrong. :rolleyes: Having said that, it'll be a right faff on if they have to be heated on.

Some gear arrived to day. I wanted the new valves for when I drop the head and block off, but got a few other bits when I was on to spread the spend out a bit. Head bolts, bearing shells and a few other bits.
IMG_5955_zpsoexfqfch.jpg


Got a quote for the injector refurbishment at £276 inc VAT for the set of 4. Quoted genuine Bosch nozzles and set to original specs. Seems expensive to me and so I'll be looking at the ones @Disco1BFG posted the link to. I told them I could buy a set of reconditioned Bosch ones for £175, but he said that was the best price they could do.
 
Al2O3 said:
Got a quote for the injector refurbishment at £276 inc VAT for the set of 4. Quoted genuine Bosch nozzles and set to original specs. Seems expensive to me and so I'll be looking at the ones @Disco1BFG posted the link to. I told them I could buy a set of reconditioned Bosch ones for £175, but he said that was the best price they could do.
Click to expand...
Blimey - me too!! that's a bit of a difference! I'll try and get round to speaking to my local guy - see what he says.....:)

The cynic in me also wonders about the availability of genuine nozzles too - given the lack of availability of ERR3337 - #4 injector on the EDC 300's. ( which is why I got rid of EDC )
 
Last edited:
greyhair said:
Have you tried diesel bob?
Click to expand...

Good shout! His reputation is rather good !! ( he's on my list for my "spares", if the local guy can't do em ):)

He actually offered to make me a #4 injector, from scratch.... but the price was, er..... silly - he even agreed with that too.... :)
 
Disco1BFG said:
Blimey - me too!! that's a bit of a difference! I'll try and get round to speaking to my local guy - see what he says.....:)
The cynic in me also wonders about the availability of genuine nozzles too - given the lack of availability of ERR3339 - #4 injector on the EDC 300's. ( which is why I got rid of EDC )
Click to expand...
The Bosch ERR3339 injectors for the standard 300Tdi seem to be readily available, so the nozzles must be? I'm just emailing LR Centre about those injectors.

greyhair said:
Have you tried diesel bob?
Click to expand...
I know the name is legendary, but never had any contact. If I Google diesel bob, will I find a contact? :)
 
Al2O3 said:
The Bosch ERR3339 injectors for the standard 300Tdi seem to be readily available, so the nozzles must be? I'm just emailing LR Centre about those injectors.
Click to expand...

Hopefully true - Doesn't stop me being cynical tho :D:D:D - I've edited my post above cos I put the wrong part number in :rolleyes: #4 is ERR3337 - IIRC, which, frankly I probably don't :D:rolleyes:
 
greyhair said:
yes should do
give me a sec will dig my paperwork out when he did mine
Click to expand...
Champion, cheers. :)

Disco1BFG said:
Hopefully true - Doesn't stop me being cynical tho :D:D:D - I've edited my post above cos I put the wrong part number in :rolleyes: #4 is ERR3337 - IIRC, which, frankly I probably don't :D:rolleyes:
Click to expand...
Ha, ha, memory like mine then. ERR3339 is the standard injector which you posted the link for. How many miles have you done on the ones you got from LR Centre?
 
yep diesel Bob
Diesel Bob (UK) Ltd,
Kitchen Green Workshops*,
Ribchester,
PR3 3XL,
01254878582
It was a while ago though (2015) £210 200tdi injectors

FUEL INJECTION PUMP
BOB BECK FUEL INJECTION LTD
TEL: 01926 888110

Hope this helps
Great service from both
 
Cheers, greyhair. Was the £210 to have your injectors refurbished or was that for ones Bob had for sale?
 
greyhair said:
that was to have mine rebuilt
Click to expand...
Champion. I've been on his site and it states from £35 per unit to recondition injectors of that type. I'll give him a bell tomorrow.
The ones LR Centre are selling seem quite cheap relative to the costs I'm finding.
 
Thanks to Aaron, I've got the crank pulley bolt off. Came off no bother with the proper tool!
IMG_5960_zpskrsj6yov.jpg


Having a tea break to contemplate taking the belt off. Having learnt from @Saint.V8 and @Disco1BFG about not moving the FIP on the casing. My bottle has gone to just whip the belt off :rolleyes:
Will I be setting all the pulleys, crank, cam etc from scratch or do I need to reference anything, stick a bolt through Fip pulley for example?

Diesel Bob came back with a price for the injectors £42 +VAT each = £201.00 inc VAT (that's not with Bosch nozzles, but ones he recommends)
LR Centre came back about the ones they sell at £175.00 inc VAT to say they were original Bosch injectors reconditioned to original spec
What would you do? :)
 
Al2O3 said:
Thanks to Aaron, I've got the crank pulley bolt off. Came off no bother with the proper tool!
IMG_5960_zpskrsj6yov.jpg


Having a tea break to contemplate taking the belt off. Having learnt from @Saint.V8 and @Disco1BFG about not moving the FIP on the casing. My bottle has gone to just whip the belt off :rolleyes:
Will I be setting all the pulleys, crank, cam etc from scratch or do I need to reference anything, stick a bolt through Fip pulley for example?

Diesel Bob came back with a price for the injectors £42 +VAT each = £201.00 inc VAT (that's not with Bosch nozzles, but ones he recommends)
LR Centre came back about the ones they sell at £175.00 inc VAT to say they were original Bosch injectors reconditioned to original spec
What would you do? :)
Click to expand...
just whip the belt off ,timing a 300 tdi is simple just dont undo the center nut on the injection pump
 
Cheers, James.
Obviously everything will be coming off as the block is going for machining. So as long as injection pump centre nut isn't loosened everything else can just come off?
 
jamesmartin said:
dont forget to remove oil squirts
Click to expand...
I've seen those in the darkness! Yeah, they are right under the cylinder where the machining will happen. I'll take a picture so I get the angle right when I put them back.
Thanks again! :)
Sun's out here anorl. Glorious weather and stripping an engine, doesn't get much better than that!
 
Al2O3 said:
What would you do? :)
Click to expand...

Well, you know what I did ! - and my reasoning was:-

A new nozzle from a reputable supplier is a new nozzle - same applies to the setup. I'd certainly trust Diesel Bob, and to the extent necessary, I trust LR Center not to sell me a POS. I have never heard of a catastrophic failure of a conventional injector nozzle, (I.E. NOT common rail ) - so I don't believe any proprietary brand is better than any other. Any such failure would be all over the web rather quickly, and the supplier could be held to account quite well, I think.

I did do a search on this and all the documents I saw relate to common rail injector failures - I have attached a report. The conclusion is essentially that poor fuel quality at extreme pressures ( in common rail Injectors ) can cause cavitation, erosion and fatigue cracking.
Since I don't have anything common rail, then I'm not worried.
 

Attachments

  • 5577a211846a7.pdf
    329.3 KB · Views: 474
You must log in or register to reply here.

Similar threads

P
Clutch stuck 300 tdi
Replies
13
Views
622
portokali
P
G
Diagnosing black smoke under load on 300tdi?
Replies
3
Views
398
D1Nut
D1Nut
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
1K
miktdish
miktdish
currymunster
I suffered a Run away diesel
3 4 5
Replies
85
Views
7K
currymunster
currymunster
Ian Whitewick
Defender 200tdi refresh
Replies
1
Views
459
steve2286w
steve2286w