Dazz
New Member
Does anyone know if a 20mm spacer will be enough clearance to fit pre 2000 alloys to a 2004 td4. Thanks
nobody knows the answer then ??????
nathan5346
Well-Known Member
I dont know
Dazz
New Member
*minty*
Well-Known Member
Dazz
New Member
Nobody knows the answer to this one then?Does anyone know if a 20mm spacer will be enough clearance to fit pre 2000 alloys to a 2003 td4. Thanks
doobreydog
Active Member
Dont know but why...plenty of newer one available and you can probably pick up a set of wheels easier and cheaper than spacers
Easy way to find out is make a cheap spacer (Steel wheel nuts are probably about 20mm) and try it
Easy way to find out is make a cheap spacer (Steel wheel nuts are probably about 20mm) and try it
Dazz
New Member
I have been given a set of alloys already fitted with new grabber 215 65 16 tyres off a 98 freelander and want to fit them on to a 2005 td4 .
Philip1972
Member
Hi Dazz
How did you go on with the spacers?
I have a 2005 and can get a set of 2000 wheels-do the spacers defo get round the problem?
Cheers
Phil
How did you go on with the spacers?
I have a 2005 and can get a set of 2000 wheels-do the spacers defo get round the problem?
Cheers
Phil
patrickkavanagh
New Member
Just checking how you guys are getting on with this. I have made some serious modifications to my 01 Freelander so I should have some stuff lying around if you need anything. I have 01 model alloys and I think I have 35mm spacers too...
vic.middleton
Active Member
Early wheels will not fit post facelift models. There is a difference in the spiggot and/or the PCD.
