SpaceDawg

Active Member

• Oct 27, 2016

• #41

Ok, not a perfect repair, but hopefully it will hold.

I cleaned up the block, slapped on the glue and left it for 2 days, you will see its run down the block, I knew this would happen and I could not put the car on it side. But there is about a 3mm cover over the hold and sourounding area.

 

raywin

Well-Known Member

• Oct 27, 2016

• #42

Hope that,s done the trick

 

SpaceDawg

Active Member

• Oct 27, 2016

• #43

So do I, it is a tiny hole and I just popped a second coat of JB on it. I'll get the car on the road tomorrow and see what happens.

 

raywin

Well-Known Member

• Oct 27, 2016

• #44

SpaceDawg said:

So do I, it is a tiny hole and I just popped a second coat of JB on it. I'll get the car on the road tomorrow and see what happens.

Click to expand...

Winter will test it the thermal cycling from running hot to sitting out on a frosty day is a hard test if it gets through that then you should be OK.

 

L

lynall

Well-Known Member

Full Member

• Oct 27, 2016

• #45

Kseal is very good at this sort of thing under a tenner off of ebay, add that to your jbweld fix and it should get you through winter.

 

SpaceDawg

Active Member

• Oct 28, 2016

• #46

All back together now so lets see how it goes.

 

MOB993

Active Member

• May 7, 2018

• #47

Hi. Did it work? I have the same problem.