R

robinfedup

New Member

• Jan 1, 2013

• #1

problem

stopped and started 3 times , then went for a while , evently stopped

2 weeks later started agian for 5mins then never went since

tried

new harness
checked fuel pressure
checked ecu for oil contamination
cleaned earth points approx 6 , is there any more to clean
checked relays
diagnostic test states is confussed - dident show problem
checked ecu from running tdi discovery landrover in my landrover and still did not start

help please the cows are starving

 

johnlad

Well-Known Member

• Jan 1, 2013

• #2

what diagnostic tester did you use?
possibly crank position sensor, but would expect that to show on a dedicated land rover diagnostic

 

R

robinfedup

New Member

• Jan 4, 2013

• #3

how do you test a crank sensor to show its working , not sure what tester the garage used

 

johnlad

Well-Known Member

• Jan 4, 2013

• #4

it should show on a diagnostic check, but dont know what physical checks can be done,
a lot of diagnostic readers cant read the td5

 

R

robinfedup

New Member

• Jan 31, 2013

• #5

what tester do you recommend to test the td 5 , thanks for the help so far , the landrover is still in my garage.

 

johnlad

Well-Known Member

• Jan 31, 2013

• #6

hawkeye or nanacom, some people on here have em if you ask, or a LR dealer or independant LR specialist

 

R

robinfedup

New Member

• Jan 31, 2013

• #7

im having problems with the td5 , did start for a while then died again , , checked earths etc now going to check out ecu's , if l try a discovery ecu will l need to remap this before it will work. if an ecu is disconnected from the loom for a certain length of time will it need reprogrammed again