mark1971
Active Member
eminenz m8.
that bill is way too much imho.
as for the car, you need to click 1 at a time and keep road testing to find the balance. as its a turbo diesel your not going to have smooth v8 pull off you will get a bit of lag from the turbo and then smooth power.
mine is not on max on the chip i have it will still pull off slow if i let it but find the balance in throttle and its fine, otherwise i can put me foot down and go into warp mode like yours is doing.
you need to find the balance in the chip and your foot lol
like i said before there not the best of devices as im a firm beleiver in live mapping but with a quality plug in sytem your getting near that pluss you can take it off when need be
as per turbo hoses that will not help as they will crush and restrict power as will exhaust sytem and the fuel spill will cause probs with air in the sytem i think. most of that you can fit yourself with little knowledge..
the drop links on the anti roll bar? never done them on a p38 but if there simlar to the classic rr and disco then there easy and cheap..
that bill is way too much imho.
as for the car, you need to click 1 at a time and keep road testing to find the balance. as its a turbo diesel your not going to have smooth v8 pull off you will get a bit of lag from the turbo and then smooth power.
mine is not on max on the chip i have it will still pull off slow if i let it but find the balance in throttle and its fine, otherwise i can put me foot down and go into warp mode like yours is doing.
you need to find the balance in the chip and your foot lol
like i said before there not the best of devices as im a firm beleiver in live mapping but with a quality plug in sytem your getting near that pluss you can take it off when need be
as per turbo hoses that will not help as they will crush and restrict power as will exhaust sytem and the fuel spill will cause probs with air in the sytem i think. most of that you can fit yourself with little knowledge..
the drop links on the anti roll bar? never done them on a p38 but if there simlar to the classic rr and disco then there easy and cheap..
No point fiddling with the chip until exhaust, turbo hoses, and spill pipes are sorted ... you'll just never get it right.
Spill pipes are small bore pipes normally with a fabric outer, looks like a woolly covering, that go between the diesel injectors. They crack, split and lose diesel and allow air into the system. Dunno if it's same for the BMW engine, but my 300 Tdi only needed about a foot of tube, cut into roughly 5" lengths ... and I had to buy 3m at the motor factors. Mind, it was only a fiver ...
Spill pipes are small bore pipes normally with a fabric outer, looks like a woolly covering, that go between the diesel injectors. They crack, split and lose diesel and allow air into the system. Dunno if it's same for the BMW engine, but my 300 Tdi only needed about a foot of tube, cut into roughly 5" lengths ... and I had to buy 3m at the motor factors. Mind, it was only a fiver ...
iannotts
New Member
mark1971
Active Member
happy new year chaps..
eminez, dont go paying that!
do all you can and shop around for parts.then pay for service..
you will save a fortune m8..
