S

Smudger1970

New Member

• Nov 1, 2014

• #1

The 3 warning lamps for the brakes, abs and TC have come up on the dash. Took it to local guy who does lands, the ecu diagnostic port cable has been cut. How difficult/ easy is it to replace the port? Where can I find an idiots wiring dig for this? How do I check the abs pump is working?

 

S

Smudger1970

New Member

• Nov 2, 2014

• #2

Update so far...replaced the connections on the fluid reservoir and the brake warning lamp goes out now, the other two.ABS and TC remain lit.

 

Brown

Well-Known Member

Full Member

• Nov 2, 2014

• #3

Is that with the car stationary or moving? Don't you have to be going more than 5mph for them to go out?

 

S

Smudger1970

New Member

• Nov 3, 2014

• #4

Both stationary and moving, both lamps are lit from start up. I've measured the resistance of all the sensors and they are all around the 900 ohms. The front sensors are clean now, can't get the rear two out yet! The diagnostic plug on the loom has been cut off, so can't interrogate the ecu! I really need advice on where to get a new plug an a wiring diagram.

 

owl

Well-Known Member

• Nov 3, 2014

• #5

Cut the plug off a breaker and re-join to yours by wire colour

 

S

Smudger1970

New Member

• Nov 4, 2014

• #6

It's finding a breaker where they are willing to cut the socket off. LR don't sell them separately. Arrrgghh

 

S

skippyfx140

Member

• Nov 4, 2014

• #7

Are these any good to you Smudger?

OBD2 OBDII J1962 Diagnostic plug - EAS Land Range Rover | eBay

 

Datatek

Well-Known Member

• Nov 4, 2014

• #8

skippyfx140 said:

Are these any good to you Smudger?

OBD2 OBDII J1962 Diagnostic plug - EAS Land Range Rover | eBay

Click to expand...

That's the plug, he needs the socket. They are available on Ebay often at extortionate prices for a one off.

 

S

skippyfx140

Member

• Nov 4, 2014

• #9

Or cut one of these up

OBD2 OBDII 16 pin Split Splitter Extension Cable Male to Dual Female | eBay

 

Datatek

Well-Known Member

• Nov 4, 2014

• #10

skippyfx140 said:

Or cut one of these up

OBD2 OBDII 16 pin Split Splitter Extension Cable Male to Dual Female | eBay

Click to expand...

Yep, but the females are not the panel mount variety and they are expensive. Bit of searching and the correct item can be found for as little as £2.50.

 

S

skippyfx140

Member

• Nov 4, 2014

• #11

I'll keep my nose out!