lazbaz · Aug 22, 2021

I need to replace the battery (AA Patrol reported to renew as soon as possible). Recommended spec is 12V 112Ah 870cca.
I have a choice of (1) Yuasa HSB334 Silver 12V 100Ah 830A 5 years Guarantee and (2) Yuasa YBX3664 12V 112Ah 870A with 2 Years Guarantee.
I am tending towards (1) with 5 years Guarantee but (2) fits the spec fully with 2 years Guarantee.
Would you folks comment and give me some Pros & Cons for the choice.
Much appreciated.

pete12345 · Aug 22, 2021

Hancock MF31-1000 are good and just fit in the box loads of previous post on here everyone got there own favourites

brianp38dse · Aug 22, 2021

With a P38 you get the biggest battery with the highest cca that will fit which is mf31-1000 as above 110-120ah 1000cca and they are not expensive.

P38-DFX · Aug 22, 2021

Another one for the Hankook MF31-1000. https://www.batterymegastore.co.uk/product/hankook-heavy-duty-commercial-battery-mf31-1000/

gold rover · Aug 22, 2021

Don't buy less than recommended spec. You'll just be buying another one at correct spec in a fortnight.

oakey · Aug 22, 2021

+1 for the 1000cca

kermit_rr · Aug 22, 2021

I have a mf31-1000 too and it's great

lazbaz · Aug 22, 2021

Thank you all for advising on the battery to get. I am now seriously thinking of getting the Hancock MF31-1000.
Cheers

tomcat59alan · Aug 22, 2021

lazbaz said:
Thank you all for advising on the battery to get. I am now seriously thinking of getting the Hancock MF31-1000.
Cheers

you won't be disappointed.

Henry_b · Aug 22, 2021

hankook on mine too..

It'll turn the motor upside down, a good unit I must say.

Grrrrrr · Aug 23, 2021

lazbaz said:
I need to replace the battery (AA Patrol reported to renew as soon as possible). Recommended spec is 12V 112Ah 870cca.
I have a choice of (1) Yuasa HSB334 Silver 12V 100Ah 830A 5 years Guarantee and (2) Yuasa YBX3664 12V 112Ah 870A with 2 Years Guarantee.
I am tending towards (1) with 5 years Guarantee but (2) fits the spec fully with 2 years Guarantee.
Would you folks comment and give me some Pros & Cons for the choice.
Much appreciated.

Platinum on mine. Think code was 641X but it'll be on here somewhere.

Check setpoint on your alternator is above 13.8V if fitting a calcium battery and anything with 1000CCA is likely to be.

RangeRoller dt · Aug 23, 2021

Got Hancook now, 643/644 Scania before but I toasted that. 750cca before that.
1000cca is a must for the diesel. Not so much on the V8 but you may as well bung the biggest you can in there itl keep the BECM happy. Price difference is negligible for the slightly smaller. May have to feed the red cable through a bit to stretch

pete12345 · Aug 23, 2021

In the process of fitting 2nd mf31-1000 in the boot for a night heater and fridge

oakey · Aug 23, 2021

pete12345 said:
In the process of fitting 2nd mf31-1000 in the boot for a night heater and fridge

Sounds interesting

lazbaz · Aug 24, 2021

Hankook MF31-1000 it will be. Some points to clarify:
(1) Grrrrrr says " Check setpoint on your alternator is above 13.8V if fitting a calcium battery and anything with 1000CCA". Yes it is Calcium battery.
(2) I read this "Calcium batteries are the most commonly fitted battery; they also go by the name of ‘wet lead acid’ batteries. The basic ingredients are no different to the old style, but these batteries are more durable and have more starting power. They have a good shelf life and are maintenance free. But they require regular use, so when drained they must be recharged using a charger to bring them back to optimal health. Modern vehicle charging systems will struggle to recharge these fully when they’re drained". Do I have any concerns for (1) and (2) ?
Thanks

Grrrrrr · Aug 24, 2021

lazbaz said:
Hankook MF31-1000 it will be. Some points to clarify:
(1) Grrrrrr says " Check setpoint on your alternator is above 13.8V if fitting a calcium battery and anything with 1000CCA". Yes it is Calcium battery.
(2) I read this "Calcium batteries are the most commonly fitted battery; they also go by the name of ‘wet lead acid’ batteries. The basic ingredients are no different to the old style, but these batteries are more durable and have more starting power. They have a good shelf life and are maintenance free. But they require regular use, so when drained they must be recharged using a charger to bring them back to optimal health. Modern vehicle charging systems will struggle to recharge these fully when they’re drained". Do I have any concerns for (1) and (2) ?
Thanks

Get the car running and check the voltage across the battery using a digital volt meter. If it reads 13.8V then I'd stick to a traditional lead acid battery. If you have 14.5V you're good to go.

mozz smith · Aug 26, 2021

HANCOCK 1000CAA MINIMUN ANYTHING LESS IS A WASTE OF TIME AND MONEY , MIN 14.2 FOR EVERYTHING TO RUN CORRECTLY .. CHEERS MOZZ

tomcat59alan · Aug 26, 2021

mozz smith said:
HANCOCK 1000CAA MINIMUN ANYTHING LESS IS A WASTE OF TIME AND MONEY , MIN 14.2 FOR EVERYTHING TO RUN CORRECTLY .. CHEERS MOZZ

You mean as in Tony Hankook.

the Staff is leaving you on your own for too long Arthur, you've got Hand cock on your mind mate.

mozz smith · Aug 26, 2021

tomcat59alan said:
You mean as in Tony Hankook. the Staff is leaving you on your own for too long Arthur, you've got Hand cock on your mind mate.

AY UP ITS DrTOMCAT , DONT BE CHECKING MY SPELLING AL ITS ALL PREDICTIVE , !!!! JUST BECAUSE U DONT GET ANY HANDJOBS

U NEED TO SACK YER CARER !!!!! XXXX CHEERS MOZZ P.S. URGENT URGENT SEND CAKE SEND CAKE !!!

lazbaz · Nov 5, 2021

Grrrrrr said:
Platinum on mine. Think code was 641X but it'll be on here somewhere.

Check setpoint on your alternator is above 13.8V if fitting a calcium battery and anything with 1000CCA is likely to be.

I read somewhere "The typical lead acid charging voltage is between 2.15 volts per cell (12.9 volts for a 6 cell battery) and 2.35 volts per cell (14.1 volts for a 6 cell battery). The ideal charging voltage for a calcium battery is 14.8V for the recombination process to properly occur"
What opinion do you have on this?

Member

Well-Known Member

Well-Known Member

P38 Enthusiast

Well-Known Member

Well-Known Member

Very

Member

Well-Known Member

Think outside, no box required.

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

Well-Known Member

Well-Known Member

Member

Technician, Bodgit & Scarper Ltd

Well-Known Member

Well-Known Member

Well-Known Member

Member

Similar threads