S

steve52

New Member

• May 3, 2007

• #1

Just fiddling with a 200tdi before dropping it in my old 90 - how easily should the actuator arm on the turbo wastegate move when still connected to the actuator - just trying to move it by hand, mine feels siezed - anyone know if this is normal? thanks
steve

 

choppa

Well-Known Member

• May 3, 2007

• #2

it should be quite stiff , but you should be able to move it . are you saying you can't move it at all ??

 

S

steve52

New Member

• May 3, 2007

• #3

I certainly couldnt move it just by finger pressure - i could try with a small open ender on the linkage? how freely should it move? steve

 

choppa

Well-Known Member

• May 3, 2007

• #4

you wont move it with one finger but you should be able to push it out with two hands . you could try taking the circlip off the butterfly bit and check that that has'nt become stuck .
did you hear the engine run before it was removed from the disco ??
if you did and it did'nt smoke then i would think it will be ok .
i have two 200tdi engines here and both of the actuators can be moved with enough pressure .