felltool

New Member
Anybody ever heard of this happen, got 2 new cv joints and when landy got reversed off the ramp 1 blew up so ordered another 1 and that did the same when took off the ramp, they cost £60 each and i have bought 3 now, am sick, just bought the truck and payed fair bit and now this is happining, anybody else had this happen, so put 1 of the old cv joints on the side that was blowing up and now it seems fine, for now anyway, its making me want to get rid, whats the score with these cv joints, any tips
 
not sure what make they were i will find out in the morning i got them from parco parts, ye they had plenty grease on them, is it bad to put alot of grease on them.
 
If it goes again, jut put it into diff lock to get you home. Sounds like a dodgy set to me - have you talked to the people you got them from?
 
One of mine collapsed and I just replaced both (With Busters great advice!), got the kit from Paddocks. £70 all in for both.
 
i did try and replace both 1 held on right side and 2 new 1s blew on left side so had to put one of the old ones back on and it seems to be holding for now, am starting to think i need the genuine cv joints from landrover and they cost fortune, And heres me thinking if i got landy my troubles would be over at least i had go on the other 4X4 i have had, this truck is turning into total nightmare, has this ever happend to anyone when replaced with new joint.
 
how old is your landy though? Have the genuine ones lasted from new? they've gotta be worth the money. perhaps you can get 2nd hand genuine ones? I'd rather buy them than buy a lesser quality.
 
how old is your landy though? Have the genuine ones lasted from new? they've gotta be worth the money. perhaps you can get 2nd hand genuine ones? I'd rather buy them than buy a lesser quality.

the landy is 03 plate with 64 thousand miles, i would say both were genuine cv joints, just want to get out in it.
 
not sure what make they were i will find out in the morning i got them from parco parts, ye they had plenty grease on them, is it bad to put alot of grease on them.

They'll be made by AMK. Ah spoke tae one o' they guys that works for partco earlier;)
 
Just curious... did ye stick the wee circlip thing and collar on that fits on the shaft and into the cv?
These ones...

CVJointrenewal012.jpg
 

Similar threads