paulwitchard
New Member
I hope this is not a stupid question, but I am new to Land Rovers.
A while ago I bought a 110 2.5TD which a fellow Normandy based Brit had decided to drive back from Bulgaria with paraffin in the tank - to save a few quid????
When I bought the car most of the top end of the engine was in the back, and I decided to get another 2.5 td engine to replace the one which was in bits.
This engine is now in situ, but I cannot get it to start - the pump has got fuel under pressure, but nothing coming out of the back of it going in the direction of the injectors.
As the fuel system was reconnected on the basis of 'educated guesswork' can anyone point me in the direction of a diagram that gives the layout of the various pipes - along the lines of 'the pipe from the tank goes to the rear hole in the lift pump, the front hole of the lift pump goes to no ? on the filter etc' - at least if I know they are on in the correct sequence it gives me somewhere to start. I have got a CD rom of most of the manuals, but cannot find a diagram of the layout of the pipework anywhere.
Many thanks in advance for any useful info.
A while ago I bought a 110 2.5TD which a fellow Normandy based Brit had decided to drive back from Bulgaria with paraffin in the tank - to save a few quid????
When I bought the car most of the top end of the engine was in the back, and I decided to get another 2.5 td engine to replace the one which was in bits.
This engine is now in situ, but I cannot get it to start - the pump has got fuel under pressure, but nothing coming out of the back of it going in the direction of the injectors.
As the fuel system was reconnected on the basis of 'educated guesswork' can anyone point me in the direction of a diagram that gives the layout of the various pipes - along the lines of 'the pipe from the tank goes to the rear hole in the lift pump, the front hole of the lift pump goes to no ? on the filter etc' - at least if I know they are on in the correct sequence it gives me somewhere to start. I have got a CD rom of most of the manuals, but cannot find a diagram of the layout of the pipework anywhere.
Many thanks in advance for any useful info.