Datatek
Well-Known Member
So worth checking the condition of the cooler and if going to be used a lot for towing I would fit a fan, easy to obtain from a breaker.
I will definitely be replacing the cooler for one with a fan, I assume the wiring will need to be retro fitted somehow?
Datatek
Well-Known Member
Easy enough job, as well as the fan you need the temperature sensor, wiring details are in RAVE or I can tell you what needs doing.
The box has been changed for the later version or a later version sump has been fitted. !997 should have a dipstick. Cooler fan and no dipstick 1999 and on.
I may take you up on that offer Datatek, me and auto electrical works don't always see eye to eye shall we say.
That said I will have a look at Rave.Where does the temperature sensor go/fit? I rightly or wrongly assumed that it would be in the cooler.
Thanks wammer, I had read somewhere that it should have a dipstick on that year but I couldn't find it.
Datatek
Well-Known Member
Sensor is on the side of the cooler.I may take you up on that offer Datatek, me and auto electrical works don't always see eye to eye shall we say.
Where does the temperature sensor go/fit? I rightly or wrongly assumed that it would be in the cooler.
Henry_b
Think outside, no box required.
The clutches are paper thin, so once they start slipping that's it..
There should be a magnet in the sump which pics up foreign matter, has the sump been dropped?
Usually it'll have a nice film of grey/black gunge if it has shagged itself..
4.2 litres should come out the sump with a standard service.
sounds like low fluid to meh..
There should be a magnet in the sump which pics up foreign matter, has the sump been dropped?
Usually it'll have a nice film of grey/black gunge if it has shagged itself..
4.2 litres should come out the sump with a standard service.
sounds like low fluid to meh..
Last edited:
