I stripped the head tonight, it looks like the valve guides need replacing, there a mix of old and new style guides in there, if I buy new guides from paddocks, will these need reaming afterwards? I do have a 10 tonne press so should be OK getting them out, anyone done this?
 
Don't have the proper tool, was gonna use a drift to get it out, if it needs reaming after then might just give it to a machine shop
 
Don't have the proper tool, was gonna use a drift to get it out, if it needs reaming after then might just give it to a machine shop
you can drift them out but to fit the tool has spigot that fits down the guide to stop the top mushrooming its best to press them in without it
 

Similar threads