About 3 weeks now until planned MOT time so better get cracking with the last few jobs. Got a new door handle for the drivers door and locks all round. Got eyebrows fitted and rotated the tyres around. Sills primed and painted (Didn't have any suitable bolts to fit yet), and gave the lower tailgate a quick paint. Got a few bits coming in the next few days such as seatbelts, wipers, door channel packing and rear window seals.

LandRover1677_zpsf0042ee8.jpg


LandRover1678_zps4dc87b69.jpg


LandRover1681_zps5b49a576.jpg


LandRover1682_zps334054f3.jpg


LandRover1687_zps20b295f4.jpg


LandRover1688_zps39147420.jpg


LandRover1690_zps79ddd5e7.jpg
 
Seatbelts arrived from Exmoor trim today. Not cheap but the old ones were all taped up and If there's one thing Im gonna do right on this build, it's the seatbelts. Got a carling switch for my fan which just needs the mount finishing.

LandRover1692_zps0938667b.jpg


LandRover1693_zps0dac3aa9.jpg


LandRover1695_zps81330f1a.jpg
 
Looking good.
How much did your sills cost?
I'm considering the YRM ones. They are about £95 for the pair, but are 3mm thick! I've heard you can have problems lining everything up with the panel being all in one though.
 
I bought mine from paddocks at £20 each for the fronts and £7 each for the rears just due to the cost as YRM's did seem a bit steep
 
Last couple of days..... Changed the exhaust nuts as they were nyloc. Fitted sills but there seems to be a gap between them and the proper sill? Got the drivers window channels fitted and window and winder mechanism in. Headlining in too. Planning for MOT a week friday. Main jobs left to do is change alternator (coming tomorrow). Fix brake problem (master cylinder is coming tomorrow), fix exhaust at the rear, rear 1/4 window seals, fix dash lights, change coolant, and a few other small bits. Could be a push but a week friday is the aim.

LandRover1696_zps7144a63a.jpg


LandRover1697_zpsee41b0c8.jpg


LandRover1701_zps2b31f5ee.jpg


LandRover1698_zps7ca96ea6.jpg


LandRover1702_zps2b2e7a07.jpg


LandRover1703_zps6cbffcb1.jpg


LandRover1712_zps337196a5.jpg
 
Got my new alternator today as I haven't got time to rebuild the other one right now as MOT is planned for next friday. New master cylinder as well but it hasn't fixed the problem with the brakes so I'll try bleeding again but other than that Im pretty stuck :(

LandRover1721_zps2fa27723.jpg


LandRover1722_zps951e7e0a.jpg


LandRover1723_zpsb9609458.jpg


LandRover1724_zpsb96186c3.jpg
 
I think there is meant to be a bottom rubber on the main sill which covers that gap, maybe someone else can confirm?
 
my bottom door seals are pop rivetted on. the bearmach ones i bought had the holes in the wrong place, so just be prepared to make new ones.
 
I got an aluminium strip with my galvanised sills from YRM which look like seal holders but just not sure how or where they attach to.
 
Right so MOT was planned for Friday but there's a chance it wont be ready as im still waiting for some fuses and turbo hoses. Also need to sort out insurance. Revised date is the 14th as I have the afternoon off college. Not much progress with the brakes but I have got them as good as they can be. I will try it with the MOT and then sort out in the future. Sorted out the wipers which was just a dodgy fuse. Changed all the indicators (again) as the bulbs wouldn't stay in the Wipac ones. A friend from college came and gave me a hand on Monday and bought his series 2 to show me.

LandRover1726_zpsa40bd3ab.jpg


LandRover1727_zpsf59afa61.jpg
 
I got an aluminium strip with my galvanised sills from YRM which look like seal holders but just not sure how or where they attach to.

The "P" shaped strip attaches to the sill rail with rivets to hold the bottom door seal. They don't come fitted as the seal fits to that strip on older Fenders but on new Fenders the seal is on the bottom of the door.

Great thread btw would love to see it in book form with pics n comments how you did things.
 
I am pleased to announce the car is complete. Last weekend I got the last few jobs done such as fit the new turbo and air pipes which look really good :) Got the rear window seals in too.

LandRover1734_zps252542e5.jpg


LandRover1735_zps027833cb.jpg


LandRover1736_zpsef2eb101.jpg


LandRover1740_zps6d2ca662.jpg


LandRover1741_zpsd682022c.jpg


LandRover1744_zps97731da7.jpg


I'd like to thank everyone for their interest in the project and the many comments. MOT is next Wednesday so I will let you all know how it goes, then needs a VIC. At some point I will make a youtube video with a larger number of pictures. I will continue to update this when I make any modifications/improvements. :)
 
brill good luck with mot (wont need it though)o and did u get a discount bulk buying zip ties ,,,lol, ;):rolly:
 

Similar threads