N

NiteMare

New Member

• Mar 6, 2014

• #21

that's looking tidy and fair progress

by the way a Series has no difflock, only selectable 2 or 4 wheel drive along with high and low ratios

that is unless someone has fitted locking diffs in the axles, unlike the 90/110 models there is no centre diff

 

D

divie

Well-Known Member

• Mar 7, 2014

• #22

Nice project, be very careful running without water diesels heat up very quickly. Same goes stopping it on the handbrake be very careful, so easy to snap a half shaft.
Keep posting the pics, nice to see.

 

TD5power

Certified Nutter

• Mar 10, 2014

• #23

more progress but not with the series itself

I have built a clarke shelter for it to love in and work on as the garage is being used for other things, anyway a day later here it is

 

M

major truma 2

New Member

• Mar 10, 2014

• #24

how much did shelter cost ?

 

TD5power

Certified Nutter

• Mar 11, 2014

• #25

major truma 2 said:

how much did shelter cost ?

Click to expand...

about £350 from machine mart

 

N

NiteMare

New Member

• Mar 12, 2014

• #26

that's a nice big shelter

 

O

old109er

Active Member

• Mar 13, 2014

• #27

that's shelters awesome. might look for one of those for next winter to keep water out the cab when standing in rain.

 

TD5power

Certified Nutter

• Mar 30, 2014

• #28

soIe more progress today

got my table and workbench in, the bench onthe left it straight, just has angled sides


also set on with the windscreen and surround, I have the lucas wiper motors so I tested them, both worked, all kushdy, I then set on with taking out the 2 sheets of glass out, kindly the last owner in there haste they painted the whole thing with hammerite


I had to use a small screwdriver and scrape out the slots in the screws, all the surrounding paint also then flaked off too, after removing all the screws and prying off the brackets I found more joys from the last owner, they used pu sealant to secure the glass in, wonderful


in some areas it was up to half an inch thick so I spent most of the evening scraping it all off

plan now is to clean up the wiper motors, glass, brackets and surround, paint it then re assemble

 

TD5power

Certified Nutter

• Mar 31, 2014

• #29

some more little bits today, cleaned up some more of the glass but no photos as its pretty much the same as last night, but I did install some lighting