Here it is, I've always been good at getting into things I have no idea about and figuring them. Well I decided to build a 130 from ground up. Richards chassis, check, TDCI XS bulkhead, check, fuel tank and lines from breaker check, entire drive train from breaker-axle, props, puma engine and gearbox ( A/C equipped), check, new take of tub and front from foleys, check....Here is where it gets sticky-I bought a 2015 ECU, clock, and transponder/keys all from a broken 130 with only 12k miles but the ECU does not work with my bulkhead-Let me clarify-the wiring loom does not fit the ECU. 2 of the 3 sockets are larger in size and my bulkhead wiring only fits one socket-Was that clear? Anyway my grand question here is what to do. I can still purchase the broken 130 wiring loom but it does not come with heated screen or A/C ect, ect-In other words it's not an XS model wiring loom . Can I buy that loom that would accommodate the ECU and retrofit A/C to it? Are there spaces in a regular non A/C loom to just pop a relay and fuse to make it A/C? Or should I just get another ECU. Keep in mind that I would have to re-programme that other ECU.
Thanks for any help
Thanks for any help