M

mudrover

New Member

• Sep 6, 2011

• #1

Ok guys does anyone known or put a zf auto into 110 only i am thinking of putting one in and cant find much info . surely i not the first nut out there to try it
ps. its v8 manuel at moment

 

jamesmartin

Well-Known Member

• Sep 6, 2011

• #2

a few, v8 or 300tdi

 

M

mudrover

New Member

• Sep 6, 2011

• #3

well the engine i want to put in is a vm 6cyl 692hta 3.6 litre with auto box out of classic range rover

 

MudHunter

Active Member

• Sep 6, 2011

• #4

can ye weld?

 

jamesmartin

Well-Known Member

• Sep 6, 2011

• #5

what do you need to weld aparrt from engine mounts if changing engine

 

MudHunter

Active Member

• Sep 6, 2011

• #6

exactly that!

 

M

mudrover

New Member

• Sep 6, 2011

• #7

i am a welder for my sins. what i want to known was there much cutting the tunnel about to get it in. [gearbox wise]

 

jamesmartin

Well-Known Member

• Sep 6, 2011

• #8

can be fitted with no cutting but needs preferably v8 or 300tdi positioning and tunnel floor plates props ,mounts etc,the only thinking bit is what you do with selector ,nas spec consol or extend cubby box or other

 

pressbrake

Well-Known Member

Forum Sponsor

• Sep 6, 2011

• #9

Also with clutch pedal out of the way you can move the steering column over a tad to help with elbow pain, that is what I have done