[gold rover]

How about when I did this just to change the heater matrix....

Aaaarrrgggghhh!! You are a very strange man, with strange tastes in fun, but hey I digress You really don't do things by halves do you
BTW did that go back without any rattles?

 

[tomcat59alan]

Cheeky git!

Why?,

 

[Saint.V8]

Aaaarrrgggghhh!! You are a very strange man, with strange tastes in fun, but hey I digress You really don't do things by halves do you
BTW did that go back without any rattles?

I do revel in it I must say.....and surprisingly...no rattles!!

 

[Mark Piercy]

Why?,

I'm from Liverpool originally..
Normally its the wheels!

 

[tomcat59alan]

I'm from Liverpool originally..
Normally its the wheels!

They have gone up in the world since you left.

 

[Mark Piercy]

It seems they drive small vans in liverpool loaded with a smashing array of tools, looking at that strip down it would be quicker to take the whole flippin' car..

 

[tomcat59alan]

It seems they drive small vans in liverpool loaded with a smashing array of tools, looking at that strip down it would be quicker to take the whole flippin' car..

If it start's, it's a Range Rover remember.

 

[Sheppy004]

Morning saint ,

Sorry been off for a few days and just seen your picture !!
Omg now that's taking the dash out !!
Got to say thanks again for all your help with the changer , I got there in the end !
Never again But the sound is excellent
Just couple of questions while I'm in your page .
My mate had a lead coming from the back of his stereo and out of his glove box on his 2004 and could play music from his phone . Can I do this with my stereo and if so what lead or leads do I need . I'm quite sure it was the same stereo as his .
Rear parking sensors , now when I put it into reverse they work ok but even if I put it into reverse and there's nothing behind they come on and a continuse noise for a few hundred yards ?
I have tried replacing a sensor but no luck ?? Any ideas .
Thanks again Craig

 

[Sheppy004]

It is a PITA. Half of the dash needs to come out because of where they have put it. I still have my replacement unit waiting to be put in because I was about to do it when 1 :realised the amount of trim that needs to come off and didn't have time, 2: much more serious jobs took over and 3: I'm just as happy using my MP3 through a sender.

Morning gold rover , I have finally changed it but to be honest , lots of work just to take the changer out . To me it was a nightmare !
Good luck if or when you do .

Cheers Sheppy