Search results

The problem was solved by replacing the dashboard. I already bought the second one.

Post in thread 'Freelander Air Con' https://www.landyzone.co.uk/land-rover/freelander-air-con.76395/post-4578398

Does anyone have a wiring diagram for the dashboard and ECU? I wonder what wires they use to communicate.

Hello. Or maybe the problem is that I turned off the Webasto diesel heater? The positive wire to the heater activation command is disconnected.

All these sensors go into the dashboard, I already installed the panel for a friend)) the result is the same.

1.25 volts on pins 1 and 2. 5 volts on pins 1 and 3. 1 is a minus, or chassis. The clutch relay works fine, I can click it through Delphi or Thinkdiag.

the clutch still works only through Delphi. When you turn on the AC, the button just lights up, and in Delphi it says that the AC button is on. but no reaction to the clutch. I now have nitrogen instead of refrigerant, about 4 bar. a 1.25 volt signal comes out from the sensor, and the...

hi guys. I want to add to my story about the renovation. so, I bought another ECU unit (key, antenna, immobilizer unit, and comfort unit), everything was removed from the car on which the air conditioner was installed. I turn it on and start everything ok. but the air conditioner still...

hi guys. I want to add to my story about the renovation. so, I bought another ECU unit (key, antenna, immobilizer unit, and comfort unit), everything was removed from the car on which the air conditioner was installed. I turn it on and start everything ok. but the air conditioner still doesn't...

Thank you. Now I'm 100 percent sure that the problem is in the ECU. Since all reference voltages are present on the sensors. and naturally the instrument panel communicates via the Can line with the ECU.

I'm from Ukraine. thanks for the detailed information. This kit costs 120 US dollars. I'll probably take the kit. Thank you.

I'll probably do that. What is a security module? Thank you!

if only I knew where to write it in the dump itself? I guess I've dealt with this. I can remove nand carefully.

no, I didn't hack it. I thought that it would be possible to register this function in the ECU, but it turned out that Delphi and mongoose cannot encode the block. We tried to connect thinkdiag but also without results. According to articles on the Internet they write that only testbook t4...

I understand that it can only be updated at an official dealer ( Thanks!)

that is, you need to encode the CCU block

that is, you need to encode the CCU block

Hi all. I have a Freelander 1 2001 td4. There was no air conditioning from the factory, I installed it, it’s good that there are all the standard wires and connectors. but it does not turn on, does not detect the refrigerant pressure and evaporator temperature sensors. Through delphi autocom...