Search results

Provent 200 filter / breather filter fitted this evening - should hopefully keep my new intercooler nice and clean and stop breather oil getting back in to the turbo inlet and round the rest of the induction system. Got some great fittings and hoses from Advanced Fluid Solutions. Also got...

In other news - I decided after installing a brand new performance intercooler that i was no way going to be feeding a horribly oily breather pipe back through it. After seeing the ammount of oil both sides of the intercooler, and in the turbo, as i replaced the hosing and intercooler, i looked...

After completing the front lift kit installation, relatively easily, i moved on to the rear this morning. Thought id have both sides done in a few hours after seeing that ALL you had to do was undo 4 or 5 bolts.... The difficulty is actually getting the car up high enough for the rear axle to...

Headlight re-seal success...... I think...... I HOPE!.....

After the confidence that changing the intercooler inspired, and inability to get to a garage, i decided to attempt to put on the terrafirma 2" lift kit...... Very nervous about being under an extremely jacked up landy, but all went well and managed to get at least one corner done. Hope that now...

Tonight escalated very quickly.... Annoyingly i also found out (albeit i presumed it was there) that the air con has been removed......

This morning was final clean up of the headlights - now just waiting on some Sikaflex221 adhesive/sealent to seal the units back up again Any other reccomendaitons on sealant? Also - Whats the best thing to use to clean up the external hue on headlights?

Decided that the passenger headlight full of water was annoying me too much.......

I can see why there may be initial seating problems - there really doesn’t seem to be a seat at all on the steel modular rims, yet there is quite a chamfer on the wheel nuts! I’ll make sure I let the garage know to check before changing all the tyres over to the modulars and being left wheel-less!

Also - read here that 'standard steel wheen nits is what you need for modulars' https://www.landyzone.co.uk/land-rover/wheel-nuts-to-fit-modulars.123243/

Hummn - this perhaps throws a spanner in the works.... I have ordered (and since received) a set of 20 steel wheel nuts and 5 locking steel wheel nuts.... What would the difference between the interface on a modular aftermarket steel wheel and a genuine D2 steel wheel? In discussion and...

Managed to find the locking steel wheel nuts for the new wheels - 4x4 tyres sell them and i think theyre Tuff Rok parts. Wheels have arrived - they look amazing I was going to attempt to change the shocks back to the 2" lift kit myself but i have a distinct lack of lifting/jacking kit, let...

I guess just another thing to keep an eye on! Maybe it’ll be a little less drippy once I’ve replaced the rocker gasket, cam seal etc.... I better put a drip tray underneath the front end as i currently have the car stored in a friends very clean garage, which has (had) surprisingly pristine...

After further reading these are Wading plugs that are supposed to be removed regularly to prevent moisture / other build up in the clutch / bell housing - anooying its not there at all though. Time to seek a replacement Annoyingly now more worried about all the oil underneath the car.....

So..... Just went to take a look at a few bits im going to do some work on over the next week or so (once bits arrive) and noticed some oil on the floor under the car - only a small ammount, so initially wasnt worried, thougth id still inspect though, as id rather no oil..... Pretty sure...

honestly I can’t tell you how helpful little tips like this are - there is in fact oil down the back of the block aswell that I thought may well have also been from the rocker cover gasket. Will add that on the to-do list. tyres are 265/75/16R

Day 1 of discovery 2 ownership: 50 miles of mainly motorway driving and the car seems to drive well (my only experience for comparison is discovery 1). Awful wind noise from light bar - going to be removed. Oil weep around rocker cover noticed More voluminous oil leak coming from breather hose...

Thank you!

A question i posted on the discovery thread aswell Ive ordered the wheelnuts for the steel wheels, however, where / can i find locking wheelnuts for Discovery 2 Steel wheels?! Searched for hours and hours tonight and come across quite a few forum posts across the web asking the same question -...