Hi all.
Is it possible to fit Struts to a Series 3 1984. I am finding it difficult to lift the bonnet and I don't want to relocate the Spare wheel.
Best regards
Chris.
Hi all.
I just bought an ex military Defender for spare parts for my Series 3 FFR. Will the Power Steering suit the 1984 Series 109.
Best regards
Chris
Hi All.
I am contemplating putting a 24 volt Fuel Pump on my 1984 109 FFR Petrol. I am having problems with the mechanical pump. It keeps draining back into the tanks. Would you recommend any perticular make or type and has anyone done this already.
Regards.
Chris.
Hi all.
I have a 1984 109 FFR 24v. The Fuel and Temp guages are both faulty. I searched the Forums for this issue and it appears that the Voltage Stabeliser is faulty. The wiring diagrams show this, however I cannot find one on my dash as indicated. Is it located somewhere else or is there some...
Hi All.
Can I use 12 v Ign Points and Condenser in a 24 v FFR Ignition System.Also, are the 12 volt Starter Brushes compatible with the 24 volt Starter Brushes.
Regards.
Chris.
Hi all.
Would anyone know what is the difference in length of the rear shackles on a Series 3 LWB and a SWB. Also, will the SWB Shackles suit a LWB.
Regards.
Chris.
Hi All.
I have just purchased a new Wolf 130 Mig Welder. Could anyone recommend the setting I should use to weld on sections of 2mm Steel. I have tried various settings already, however, none seem to be very good.
Also, one uTube video suggesting welding without the Shroud covering the Tip. Is...
Hi All.
I want to strip the Chassis back to bare metal. I have tried Nitromorse and it is useless. I have started sanding, however it is very slow and difficult to get at some areas. Some web sites suggest using Brake Fluid. What are your thoughts on this or any other suggestions.
Regards.
Chris.
Hi All.
Could anyone please help me with the Part Number for the Universal Joint on the Rear Prop Shaft, (next to the Rear Diff Unit), on a 1984, 109 ,2.3 cc, Petrol, FFR.
Cant find it in the Parts Manual.
Regards.
Chris.
Is Zinc 182 Grey Rust Primer any good. I have removed all the loose paint and rust with scrapers, wire brush and finally with paint strippers. There is still about 70% paint still on the Chassis.
Regards.
Chris.
Hi.
I am restoring my 1984 109 and need to remove an LPG Tank from the Tub. The Tank is about 25% full. Is there any way to shut off the gas at the Tank or do I need to drain off all the gas when I disconnect the pipe feeding the Vaporiser ?. It is a Romano Stage 1 LPG Kit.
Regards.
Chris.