- Posts
- 9,164
- Location
- A bit sarf of Dorking
Ah well, a spell in the Series will remind you how comfy a 'Fender is.
200tdi dropped its oil!
- Thread starter dag019
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Unsurprisingly, for me at least, the MIL and wife did not expect it, the series fired straight up, didn’t even need a jump and other than the transfer box didn’t need any fluids. So I call that a result having been sat since before son was born in December. Hopefully new oil cooler pipe will arrive in a couple Of days. But I may see if I can get a lift to dartford on Tuesday for work rather than try and take the series around the m25! I’m sure it would do the 300mile round trip. But I am not sure I would make it!
- Posts
- 1,050
- Location
- Worcestershire
Last time i saw an engine bay like that was after changing my oil and filter at work on YFO and when i got home, about ten miles later noticed some wiffs of smoke from under the bonnet. i opened it and found the bay covered in oil because i'd left the filler cap on top of something in the bay and forgotten to put it back on. My next shock was when i went to collect my new filler cap and was told it was something like twelve quid. I thought Pete was taking the mick but he showed me the invoice. Needless to say i haven't done it twice!
- Posts
- 9,164
- Location
- A bit sarf of Dorking
Dunno if you've left yet, but is the MiL's wand hollow?
You want some of that plastic spiral wrap they uee to protect hydraulic hoses.
Hicap phill
Well-Known Member
- Posts
- 15,443
- Location
- Wiltshire
Use some metal weld putty.
Hicap phill
Well-Known Member
- Posts
- 15,443
- Location
- Wiltshire
is this the piece you have broken??
Flossie
Well-Known Member
- Posts
- 10,704
- Location
- Shropshire
Think it's the rubber bit that has worn through.
Pirtec crimped new rubber on to the old fittings for me around 15 yrs ago, still good. I wouldn't have used Steve Parker ones or their hose kits either but I did use there downpipe that I've had to weld twice for rot.
- Posts
- 9,164
- Location
- A bit sarf of Dorking
Since you bring it up, I wouldn't either. They were a lot less than helpful when the stainless system i bought for a 200tdi SIII wasn't remotely close to fitting. I ended up cutting that and putting a flexible joint in. Supposedly the experts in custom LR exhausts too.
I will order some of that. You can see in the engine bay photos whether was a risk of it contacting the inner arch I did put some old radiator hose around it. But didn’t cover the whole length and typically wore through where it wasn’t covered!
It’s indeed the rubber that has worn through. I was going to a mini could get it repaired at the local hydraulic place so I at least ah e a spare for the future.
Hicap phill
Well-Known Member
- Posts
- 15,443
- Location
- Wiltshire
- Posts
- 1,050
- Location
- Worcestershire
Or some garden hose. That's what the Disco 2 boys suggest slipping over the fuel lines that go from the fuel tank to the filter and engine bay that sit on top of the fuel tank and wear themselves through.
Problem with garden hose is that it can wear the thing you are protecting where it exits the garden hose, especially if used on a curve.
The cheap stiuff from ebay etc will do the job, but the better quality gear from jcb/case/pirtek etc will be better, but probably overkill for what you need.
- Posts
- 1,050
- Location
- Worcestershire
I never got as far as replacing the leaking fuel hose on my D2. A guy knocked on the door asking if it was for sale, so i put it through an mot, it passed, so i sold the car and gave him the new pipes to put on himself.
RustyDefender
Well-Known Member
- Posts
- 469
- Location
- Lake District
why is no one commenting on how clean that steering rack is!
Hicap phill
Well-Known Member
- Posts
- 15,443
- Location
- Wiltshire
That’s how they come.un painted and shiny alloy(later type disco 300)
RustyDefender
Well-Known Member
- Posts
- 469
- Location
- Lake District
Yeah can't wait till mine gets back from the garage this week and show you mine
It is only that shiny because it is less than 12 months old after having rebuilt it after an engine fire: LINK It is the later model late 300/td5 steering rack.
It may be but I have ordered the overprice steve parker kit as I cannot have the vehicle off the road any longer than necessary and that is what I fitted during the rebuild (at half the current price!). Whereas the series is ok to get me around in the interim it is not really up to (or rather I am not really up to) doing 500-1000miles a week!
