Thanks for the replys Will have a look tommorrow

Dont have a problem with identifing what each wire is for but its with the terminals on the sender as each one is the same male spade connection all in a row. Thank Jamie

Thanks for the reply. I did pull the sender from the tank and moved it manually but the same problem only reading 1/4 full. I will try and earth the gauge directly to the battery tommorrow. Should I be getting 12v at the tank ???? The sender unit has three terminals on it all in a row. I...

Hello I am having problems with my fuel gauge not reading more than 1/4 full when the tank is full of diesel. I have tested the gauge on a battery and the needle is going from empty to full. I have tested the live feed to the gauge which is reading 12V no problems here. I then disconnected...

Anyone got any ideas ??

I have already pulled the sender out the tank to check if the float is stuck but its working ok. Is the sending supposed to be getting 12v supply ? There are three connections on the sender I know one is the supply from the gauge does anyone know what the other two do ?. I have read somewhere...

Ive got a problem with my fuel gauge only reading half tank when I fill it up. I have checked the voltage going to the sender unit and found to be only six volts. After reading previous posts it looks like it should be 12V ? But when I remove the earth wire from the back of the gauge the...

Thanks tottot that looks like the plan. Would still like to find out what model of bulkhead I have fitted to make future troubleshooting a bit easier. Cheers

That was my plan to fit the old one but I cant remember if the compensator (g valve) was from the original system or from the new. If I could correctly identify the new bulk help it would help. I have another issue with the fuel gauge not being compatible with the original sender unit but if I...

Hi I have a 200 Tdi which I have changed the bulk head two years ago. The problem I have is the brakes take a few pumps to get a sufficient brake. I have lived with this problem up until now but a recent detour into a ditch promted me to get the finger out !. I am unsure of the bulk head I...