Thanks Shifty Muchos Gracias. Thats my Saturday sorted!

Howdy Just received a new Power Steering Pump for my Defender TD5 from LR Series in the post today. I notice there is no gasket with it. Called the LR dealer and they said there was no gasket listed for a Power steering pump on a Defender TD5. I just wanted to double check on this forum...

...oopsss just realised the second pic in the reverse side of the same undertray tray :doh:

The first Pic is definitely the undedtray for theTD5 -i've just removed mine and been advised not to bother putting it back on - easier to spot the oil leaks! ;) Ddont know what the sec pic is off. Doubt either of these will dampen too much noice but good luck with it. What price are they...

Thnx Shifty Figured it out I needed to drop the propshaft after half an hour! :confused2: Couldn't believe it required that amount of effort to take off an undertray?? Anyway - after all my efforts in getting it off in one piece it now sounds like I need to give it a bit of the ol' consaw...

Evening All! Appologies in advance for a the dumb question but ..heres goes ..... got myself all geared up to do my first service on a 03 110 TD5 this evening and came unstock at the first hurdle ... Jacked it up on Anxle stands and removed all 6 bolts of the undertray but couldn't figure out...

Thanks Bluehaze Spent sometime today checking it out. Found the heater box and yes you're right - a tad awkward. It looks like I will need to drain the colling system if I want to dismantle and take it out. Are there are quick electrical checks I can do before I go to the bother of takign it...

Thanks for the clothign tips guys! How do I access the heater box? Do I need to remove the front dashboard?

Afternoon Folks, The heater fan in my TD5 has just stopped working. Not a good time of the year for that to happen!:mad: Checked the fuse and it seems fine. Any other suggestions? Cheers!

Folks I was getting very little suction going to the servo from the brake vacuum pump. Put a gauge on it and it was reeading less the 10psi at idle and around 40 psi at 5Krpm (Not sure if thats norm?). Removed the pump but as its a sealed unit not sure how to tell ifs its functioning properly...

Thanks. Is that "Change the Servo" or "change the Vacuum pump"? Any good liks to a a repair kit?

Evenin' all Started to have a problems with a hard brake pedal on '97 300tdi. Little or no suction coming from vacuum hose when I unplug it form the servo. Would i be correct in saying the vaccum pump is caput? Anyway of confirming before I take it under the knife? Cheers!

Will a TD5 wing fit a '97 300tdi? If yes, then how much are you lookin for it?

Yip, you got it marcus ... both sides devoid of the wee holes! Wehn i bought it they told me it had been "brused" on the drivers side so I'm guessing they did a diy job and replaced it witha second hand 200tdi wing. Comfortable that I wasn't sold a lemon, have had the chceks done. thanks...

Cheers Marcus Don't have the snork yet, that was goin to be my next question, what type d'you reccommend or does it make a difference and where's the bargains?

tis sittin' inside the drivers side wing bygar!

No offence Adz! Should I just make a small "incision" on the side of the wing?

Had that conversation already and confirmed by the experts it is a 300tdi!

Hey Grunt, me again! Time for anudder bit of humour! lookin to put a snorkel on me 300tdi but all the "searching" (note mad hat man!) indicates the snorkel fits on the side of the drivers wing however my wing only has a vent hole on the top of the drivers wing?? Me thinks some1 stuck a...

Cheers grunt! ;)