1. C

    Inlet vacuum port 3.5 efi

    Thanks mate, I'll strip it down and look for it :)
  2. C

    Inlet vacuum port 3.5 efi

    Hi all, Quick question, on the EFi the port on the top of the inlet plenum feeding the vac advanced, should that be a normall fully open hole? I.e. I can only get a .6mm welding wire in it, though to the inlet, should it be fully open to the size of the nipple? Could someone check theres for...
  3. C

    97 3.9 Disco rough running

    Check you timing with a strobe.
  4. C

    Me handy handbag

    Thanks guys, just seen it on wiki about the Disco aswell, but seems to be incorrect! :D
  5. C

    Me handy handbag

    Hi All, I have a light blue handbag (landrover) come with the disco 1 and have been told by someone that they are rare to come accross and could be worth something. Is that true or balls? Thanks
  6. C

    Vac timing

    Thanks again mate, just going though everything at the mo as it feels low for the 'power' it should have and then vibrates and runs of of steam as I get higher up the rpm past 3500k. I know its only there for part throttle crusing to advanced the timing but just going though everything I can...
  7. C

    Vac timing

    This one?
  8. C

    Vac timing

    Thankyou Mr Noisy, so if i was to get a vac pump on it I should be able to pull though the damper? Is the damper there on all of the vac advanced units? As I read alot of people able to just suck down the pipe and move the timing?
  9. C

    Vac timing

    Thanks Wookie, thats the thing tho, is with this 'one way valve' inline is its not allowing a vac at the dizzy end but it is at the inline valve inlet, so I knoe this thing is stopping the vac. Its a black disk like thing with one end of it brown, and the brown end is closest to the dizzy. If...
  10. C

    Vac timing

    Hi all, Searched but couldnt find what I was after. Someone has had a fiddle with my breating system and hoses (last owner), what Im wanting to know is the one way valve on the pipe to the dizzy for advanced timing, what way arround should it be if there at all. I ask this as when I have the...
  11. C

    Running Stupidly Rich

    Hi, sorry to revive an old thread but is this part an EER4765 as I found mine broken and now is even more broken in little bits! ERR4765 - ALLMAKES OE T Piece/Restrictor - Plenum Hoses E - Land Rover Parts Direct Thanks all
  12. C

    Hello - cornwall

    Thankyou all, just looking into how to make it breath better and look after it. You lot make my 'hair' stand up with them jokes, lol. (oh dear)
  13. C

    Hello - cornwall

    Hi LandyZone, New here and with my new Disco 1 v8 3.5, needs some tidying but what disco don't. Looking and seaching around, and some wise people here. Thankyou and see you around. Dave