Folks, Just did the air to coil conversion 2" lift with the medium kit from Terraf.... Lift on the front 6cm and rear 4cm. Not so impressive. But the ride is much more comfortable. So after now having fitted a discrete winch, front lift is 5cm. Better:clap2: Still I would like to get min...

Short feedback about the CDL rewiring. I changed at 0223 the pins, but didn't showed any effect. (colour of the cabling was also not according to the diagram) My connector had also a green colour (it is the upper connector from three) . According to the mannual all three connector should be...

Awsome holder, looks really good. With my black smith skills :D I will never be able to make it. Brushed alu etc. ;-) The OBD connector advises are good, I will check it next WE. The security code came instantly on my side. Have great Tuesday

Hi Steve911, how can the OBD connector be moved ? I was thinking about Y connector. But at the same time totally bollocks, as my Nanocom can do all jobs necessary ;) About the environmental impact. I would expect that it should not be a great problem. I read in our blacklandy forum that a...

Hi, After air to coil conversion I am a happy owner of a Nanocom Evo. Of course the main reason to get it was that I do needed to switch off the Air Suspension off :D (as written in the capex request) I discovered that the NC Evo can be used as an instrument. I would like to ask, if...

I was able to find in the circuits the connector as you described. Page 121 makes it clear. (47 Instruments) I searched also for the diff switch and there you can see that the original switch is also connected to the ECU.(35 ABS) Is this now relevant i.e. does the ABS or ETS need an input to...

Hi guys, Thanks for the fast replies. That sounds promissing. @sierraferry: I do have the RAVE and should be able to read diagramns:) Long time ago I do learned it and hope so that I didn forgot it :-) If you could point me into the right direction it would help me. Thx and have a...

Hi, Just upgraded my transfer case with a cdl from an old TD5 transfer housing. I didn't had originally the CDL installed. :cool: When I fitted the housing and connected all up, I do used the only availale connector which was free. Now when I am engaging the CDL then as a result the Gearbox...