It was the red wire coming from the door that sends the signal. Everytime i was moving the wires to check them it was connecting to give me continuity in the wire but when i was tucking the wires away again it was disconnecting.

Yep i did in the end by puting a match under the petrol tank. Sent you a pm Max

Many thanks to Irishrover for sorting the Becm out for me. Motor started first turn of the key but still have the problem of nothing working on the driver door. Have checked all wiring from door back to Becm and all connectors and all seems to be ok ???????

Island 4x4 are doing them for under 50 quid the now.

I have managed to get my hand on a Blackbox sync mate. When plugged in with the ignited at II it flashes red once which says the EMS did not respond to wake up. If i put the ignition to III the box flashes red 4 times which says the BECM did not respond to wake up. Any suggestions to what is...

I dont i only have the one key.:o

1) yep engine wont start 2) yep everything works ok on passengers door 3) yep everything works ok on the rear doors The engine check light does NOT come on when you put the ignition on.

But is it possible that with the window and mirror not working that the key lock wont be working either and by that not allowing me to re sync the key or use the EKA code????

I have tried many times but still no joy:confused:

The fob is flashing when turning in the door but doesnt flash when put in the ignition

Yep there is power going to the outstation in 2 wires as you say. A thick wire purple and a blue trace and a thinner wire purple with a black trace.

Yep ive tried doing it a few times putting it in the lock and turning it whilst pressing the lock button. But would it still re sync the key if there is nothing working on the door ?

When i took the door card off i checked the wires from the door lock back to the outstation for continuity then the window motor back. Then from the outstation back through the door to the connector in the pillar. Then from the pillar back to the becm.

Anybody offer any help here as its doing my head in now :confused: My p38 on a 95 plate has nothing working on drivers door. No windows no mirror and no central locking. I have taken the door card off and followed all wires back through the door and tested them and there seems to be no breaks...