I have just bought a Freelander HSE 2004 that has a Becker sat nav system that is not working, it asks for the code and when entering the code in the service book will not accept, after a few goes I get the warning sign. Went on Unlockforum.com site and they helpfully confirmed code as correct...

Hi, just seen this great download, does anyone have a link to Freelander 1 manual Thanks

when I try opening this after a 6 min download it seems to wnat to create a disk but nothing haseen downloaded, any advise or where can i get rave info for wiring diagram for disco 1 V8 1997

ok thanks

Great Links, are similiar ones available for Disco I

Hi Great Lionks for Discovery II electrics, are similiar ones available for Discovery I Having a few issues with mine Regards Glyn

Messed about a couple times with this but still no luck. How do I check for a bad earth, does that mean no earth or poor connection or intermitent earth. Do I need a meter to test and if so what kind of meter would people advise

many thanks will take alook at these, seems drastic to get radio working but will check out to find cause

Sorry dont understand!

That explains why Direct Line have written to me asking for proof of thatcham alarm. When applying by phone I was asked by the young lady if it had a thatcham approved alarm and I replied that I did not know but it did have a standard landrover alarm, as is one of the options on the Direct Line...

Have messed about with the wires, all look ok, will have to get a meter to test them, any advice on what to go for? On taking the Radio fuse out from B9 the loud clicking noise disappears, could this mean a bad / faulty connection somewhere?

thanks discool, it cuts out and stays off, so I do not think it is the head unit. another thing I noticed even before connecting the head unit is a loud cracking/clicking noise from the speakers when turning the ignition on/starting the engine. Would that be anything to do with the sub woofers...

Disco 1 200TDI 1993 Recently got the above which did not have a radio in it. Have fitted a Sony head unit via the wiring loom/connectors and the radio works when the ignition is on. As soon as I turn the engine on the radio cuts out. can anyone help with this thanks

Thanks Mr Noisy and others I am now confident on what to do and will follow your post

jamesmartin Doh!! On reading your post again just realised that should get power from White as I assume that will only make it live when ignition is on as opposed to connecting to the brown which is always live and someone pushing thy button even when key is not in, or ignition is not on will...

Cos I got two relays, one in the kit and the existing one. Just wondered if it was of any benefit to have two or would they simply not work. I will not use the kit one. As to wiring in my push button will cut the red/white so then I assume there is no feed to the relay. I will connect the...

Thanks for that but dont quite understand. Realised now however that I got the colours wrong and its a large 'White and Brown' wire and small 'White and Red' as well as the Brown and White wires. Am i right in assuming Large Brown - Live Feed Large White - Fuel shut off and glow plugs...

The ignition switch on my 93 Discovery 200 TDI is damaged, the barrel is worn and does not seem to return from position three, the start position, and one of the lugs holding the wiring loom on the end is broken and the connections come loose. I want to fit a push start button with still using...

Power Steering - The pipe from the pump on my defender 19j was leaking so I tried renewing it. On taking the old one off and comparing with the new one supplied by Landrover they are different. Apart from the length the replacemnt has a male connector to the pump wheras the existing is a female...